behaviors of stress corrosion cracking (scc)in martensitic stainless steel(aisi 420) and low carbon austenitic stainless steel (aisi 316l) have been compared under different conditions of temperature, environment (mgcl2), and strain rate. the results show that decreasing strain rate has detrimental effect on mechanical properties of both steels, including their strength and ductility. fractogra...

In modern history, metals have been used as implants since more than 100 years ago when Lane first introduced metal plate for bone fracture fixation in 1895 (Lane, 1895). In the early development, metal implants faced corrosion and insufficient strength problems (Lambotte, 1909, Sherman, 1912). Shortly after the introduction of the 18-8 stainless steel in 1920s, which has had far-superior corro...

In this study, the synergistic effects of abrasion and corrosion on AISI 316L stainless steel have been investigated using a micro-abrasion test rig. A series of results from abrasioncorrosion tests conducted using the micro-abrasion rig are presented. AISI 316L stainless steel has been studied under both pure abrasion and abrasion-corrosion conditions simulated by either distilled water or 3.5...

A stent in artery is subjected to significant mechanical loads due to the repetitive cyclical pressure loads and displacement of the artery wall. The arteries expands and contracts slightly as the pressure changes with the heart beat for long-term in-vivo service. The structure of the stent has to withstand these loads while scaffolding the narrow artery. Many different stent designs and materi...

A simple and effective method without vacuum to control the wetting properties of AISI 316L stainless steel using femtosecond laser pulses at high repetition rate has been developed. Both hydrophilic and hydrophobic surfaces were formed by creating micro-conical structures on the surface with femtosecond laser irradiation in air. The scan speed was found to be an effective parameter in controll...

the aisi 316 l stainless steel (ss) specimens were exposed to passivation surface through two different processes including; holding in 40-vol% hno3 at temperature of 60 ºc for 30 min and 15-vol%h2so4 at ambient temperature for 1 hour. the corrosion behavior of specimens was evaluated in physiological solutions by electrochemical in vitro tests through linear and tafel polarization tests. cycli...

Dental alloys as CoCrMo, SS 316L stainless steel and NiTi were electrochemically investigated in artificial Fusayama saliva, unmodified and modified with two different concentrations of natrium fluoride. Electrochemical tests include measurements of open circuit, measurements of linear polarization, potentiodinamic polarization curves and electrochemical impedance spectra. The best electrochemi...

Corrosion tests of 1015 low-carbon steel and two stainless steels (410 and 316L) were conducted in a pure zinc bath (99.98 wt pct Zn) in order to better understand the reaction mechanisms that occur during the degradation of submerged hardware at industrial general (batch) galvanizing operations. Through this testing, it was found that, in general, 316L stainless steel showed the best dissoluti...

one of the bellows producing method is hydroforming process .whereas some factor of hydroforming process specially internal pressure affects on final characteristics produced bellows such as bursting, wrinkling and wall thickness distribution. in this paper the effect of internal pressure factor in final quality of produced bellows will be investigated. in simulation of process, abaqus/explicit...