Although deep drawing process in the macro scale are well developed, the known concepts cannot be applied to micro deep drawing through directly scale down the specimen and tooling size due to the so-called size effects. Therefore, tensile test and micro deep drawing experiments were conducted to generate the knowledge for the micro deep drawing process. Stainless steel 304 foils with 4 differe...

A high quality joint between tool steel and stainless steel alloys is hard to achieve with the conventional welding process. In this study, a new process of joining semi-solid AISI D2 tool steel and AISI 304 stainless steel using a partial remelting method is proposed. Metallographic analysis and Vickers hardness tests were performed. The results obtained from investigating the basic geometries...

During machining of stainless steels at low cutting -speeds, workpiece material tends to adhere to the cutting tool at the tool-chip interface, forming built-up edge (BUE). BUE has a great importance in machining processes; it can significantly modify the phenomenon in the cutting zone, directly affecting the workpiece surface integrity, cutting tool forces, and chip formation. The American Iro...

An experimental model was proposed to study biofilm formation by Listeria monocytogenes ATCC 19117 on AISI 304 (#4) stainless steel surface and biotransfer potential during this process. In this model, biofilm formation was conducted on the surface of stainless steel coupons, set on a stainless steel base with 4 divisions, each one supporting 21 coupons. Trypic Soy Broth was used as bacterial g...

Recently 304 stainless steel finds many applications like Automotive, Aerospace, Nuclear, Chemical and Cryogenics. The cylindrical grinding parameters on 304 stainless steel are conducted using Taguchi design of experiments of L9 orthogonal array was selected with 3 levels with 3 factors and output parameter of Surface Roughness is measured. The quality of the surface describes the relationship...

A gas-gun technique to radially expand cylinders of a chosen material, based on a technique developed in 1979, has recently been re-established. Stainless steel 304 cylinders of length 160 mm, internal diameter 67 mm and thickness either 0.5 or 1.5 mm have been expanded using a 70 mm bore single-stage gas-gun. Microstructural analysis of the recovered specimens was performed using optical micro...

Sol-Gel coatings are a good choice for protection and bioactivation of metals used as dentistry and standard surgical implant materials. These films should both prevent degradation of the substrates by wear or corrosion, and bioactivate the material for inducing the formation of a hydroxyapatite (HA) rich layer onto the material surface, thereby permitting a natural bonding to living tissues. T...

The ability to map plastic deformation around high strain gradient microstructural features is central in studying phenomena such as fatigue and stress corrosion cracking. A method for the visualization of plastic deformation in electron back-scattered diffraction (EBSD) data has been developed and is described in this article. This technique is based on mapping the intragrain misorientation in...

Anodes of 304 stainless steel have been processed by a continuous wave Yb fiber laser with a wavelength of 1.064 lm and subjected to 50 keV electron bombardment in order to determine the extent to which hydrogen outgassing is reduced by the laser surface melting treatment. The results show a reduction in outgassing, by approximately a factor of four compared to that from untreated stainless ste...

Laser beam welding (LBW) is one of the most important manufacturing processes used for joining of materials. It is also a remarkably complicated, nonlinear operation involving extremely high temperatures. Since its invention more than two decades ago, laser beam welding has been more of an art than a science. Laser welding of austenitic stainless steel AISI 304 the candidate material of this re...