The paper describes a program of mechanical testing on donated human eye bank lenses. The principal purpose of the tests was to obtain experimental data on the shear modulus of the lens for use in future computational models of the accommodation process. Testing was conducted using a procedure in which deformations are induced in the lens by spinning it about its polar axis. Shear modulus data ...

In this work, the effect of rock bolt angle on the shear behavior of Rock Bridges is investigated using the particle flow code in two dimensions (PFC2D) for three different Rock Bridge lengths. Firstly, the calibration of PF2D is performed to reproduce the gypsum sample. Then the numerical models with the dimensions of 100 mm * 100 mm are prepared. The Rock Bridge is created in the middle of th...

Wave propagation is used as an advanced tool of determining elastic properties of rocks. In spite of being cheap and non destructive tests of rock mechanics, due to its modernity method is not yet replacing the traditional dear and destructive tests. In order to pave ways of replacing this test and making best use of it all effective factors of such method are to be assessed. One fundamental fa...

The effect of particle size on shear strength of granular materials are investigated using direct shear tests. Small direct shear test (60 mm by 60 mm by 24 mm deep) were conducted for particles passing the sieves with opening size of 2.36 mm. Meanwhile, particles passing the standard 20 mm sieves were tested using large direct shear test (300 mm by 300 mm by 200 mm deep). The large direct shea...

We have developed a soft-material elastic modulus and shear modulus sensor using piezoelectric cantilevers. A piezoelectric cantilever is consisted of a highly piezoelectric layer, e.g., lead– zirconate–titanate bonded to a nonpiezoelectric layer, e.g., stainless steel. Applying an electric field in the thickness direction causes a piezoelectric cantilever to bend, generating an axial displacem...

Shear wave velocity (Vs) is known as one of the fundamental material parameters which is useful in dynamic analysis. It is especially used to determine the dynamic shear modulus of the soil layers. Nowadays, several empirical equations have been presented to estimate the shear wave velocity based on the results from Standard Penetration Test (SPT) and soil type. Most of these equations result i...

introduction: failures might occur at metal‒porcelain interfaces as a problem with metal‒ceramic restorations even with the application of airborne-particle abrasion technique. this study was undertaken to evaluate the effect of nd:yag laser treatment on the bond strength of porcelain fused to metal. methods:  twenty-four cylindrical specimens (4 mm in diameter and 4 mm in height) were made of ...

Offshore wind turbine (OWT) foundations are subjected to a combination of cyclic and dynamic loading arising from wind, wave, rotor and blade shadowing. Under cyclic loading, most soils change their characteristics including stiffness, which may cause the system natural frequency to approach the loading frequency and lead to unplanned resonance and system damage or even collapse. To investigate...