Porous low noise wearing courses are popular in Switzerland. However, after 4 to 5 years service distresses appear mostly due raveling. Measuring the susceptibility loss of aggregates is therefore considered a desirable step quality control. The research project was able demonstrate problematic nature scuffing test according EN 12697–50. Instead, it has been shown that simple pull-off many adva...

Abstract When quickly detaching an elastomer from a counterface, viscoelasticity dramatically increases the perceived adhesion relative to its adiabatic or equilibrium value. Here, we report simulations on sticking contact between rigid cylinder and viscoelastic half space revealing maximum in work of separation at intermediate pull-off velocities. Maximum tensile forces yet increase monotonica...

During micro-assembly processes, planar contacts often appear (between two manipulated components, one manipulated component and its gripping tool or substrate). Adhesion forces being predominant at the microscale, such contacts have important consequences on assembly strategies. One of these adhesion forces is the pull-off force which is the necessary force to break a contact. This article foc...

During micro-assembly processes, surface forces influence the behavior of micro-objects more than volumic forces. Generally contacts happen between a microgripper and a micro-objet or a substrate and a micro-object. The pull-off force which represents the force required to break a contact is one of the predominant problem in micro-assembly. Now, current force measurements are mostly focused on ...

During microscale object manipulation, contact (pull-off) forces and non-contact (capillary, van der Waals, and electrostatic) forces determine the behaviour of the micro-objects rather than the inertial forces. The aim of this article is to give an experimental analysis of the physical phenomena at a microscopic scale in dry and liquid media. This article introduces a review of the major diffe...

We employed a novel picoindenter (PI)/scanning electron microscopy (SEM) technique to measure the pull-off force of an individual electrospun poly(vinylidene fluoride) (PVDF) fibers. Individual fibers were deposited over a channel in a custom-designed silicon substrate, which was then attached to a picoindenter. The picoindenter was then positioned firmly on the sample stage of the SEM. The pic...

During micro-assembly processes, surface forces influence the behavior of micro-objects more than volumic forces. Generally contacts happen between a microgripper and a micro-objet or a substrate and a micro-object. The pull-off force which represents the force required to break a contact is one of the predominant problem in micro-assembly. Now, current force measurements are mostly focused on ...

In this study, the effect of surface roughness and roughness morphology on the bond strength of WC-Co-Cr coatings has investigated. The three different surfaces morphology are use for this purpose. The first and tow samples sandblasted with alumina and silicon carbide respectively. Other sample no sandblasted before spraying process. The same WC-10Co-4Cr coating deposited on the substrates with...

Adhesion and friction tests were carried out in order to investigate the effect of temperature on the tribological characteristics of poly(methylmethacrylate) (PMMA) film using AFM. The pull-off and friction forces on the PMMA film were measured under a high vacuum condition (below 1 × 10(-4) Pa) as the temperature of the PMMA film was increased from 300 to 420 K (heating) and decreased to 300 ...