Mesoporous, 3-D, nanocrystalline Si has been synthesized via the magnesiothermic reduction of SiO particles at a peak temperature of only 500 °C in a scalable flow-through reactor setup. Such 3-D porous Si as an anode material exhibited high, reversible capacities (i.e., >900 mA h g(-1) after 160 charge-discharge cycles at 1000 mA g(-1)).

Handling of bulk solids takes place in gasifiers either at the feed point or at the section of discharging waste and residues of the combustion and gasification. In large gasifiers, significant amounts of waste are expected to be produced, hence a proper gasifier design that allows an effective discharge of the waste from its bottom is essential for a smooth and reliable gasification. Poor gasi...

A chute is characterized by a steep bed slope associated with torrential flow. This chute flow may be either smooth or stepped. The flow conditions in stepped channels are classified as nappe flow, transition flow and skimming flow. In this paper, hydraulic characteristics of flow regimes on the stepped channels are presented systematically under a wide range of discharge, channel slope and ste...

Alteration of the spatial variability of natural flow regimes has been less studied than that of the temporal variability, despite its ecological importance for river ecosystems. Here, we aimed to quantify the spatial patterns of flow regime alterations along a river network in the Sagami River, Japan, by estimating river discharge under natural and altered flow conditions. We used a distribute...

Joint European Torus discharges which demonstrate the critical role the safety factor profile, q, can play in the formation of internal transport barriers (ITB) are examined. In these discharges, the target parameters, including the E x B flows, were kept virtually the same, except for the q profile. In a discharge with a nonmonotonic q, an ITB was triggered whereas a discharge with monotone q ...

A rule of thumb is presented to determine where variations in the discharge of a pumping well have a significant influence on the flow in an aquifer. The rule of thumb relates the period of the variation of the discharge to the distance from the well beyond which the transient effect on the flow in the aquifer is insignificant. For example, when an irrigation well pumps intermittently during th...

We present experimental and numerical results of the effect that a partial discharge has on the morphological and micro-mechanical properties of non-spherical, convex particles in a silo. The comparison of the particle orientation after filling the silo and its subsequent partial discharge reveals important shear-induced orientation, which affects stress propagation. For elongated particles, th...

River confluence is a common feature of most irrigation and drainage channels and river systems, where tributary conflicts the main channel. In these section, rapid changes in velocity and discharge, sediment distribution and flow turbulent result in a deep confluence scour, a bar point in the separation zone at downstream of junction corner  and finally vortex flow. Thus, the main goal of this...

A simulation is developed to investigate the kinetics of nitric oxide (NO) formation in premixed methane/air combustion stabilized by nanosecond-pulsed discharges. The simulation consists of two connected parts. The first part calculates the kinetics within the discharge while considering both plasma/combustion reactions and species diffusion, advection and thermal conduction to the surrounding...