ss as: Sa t bark. Abstract Biosorption of nickel ions from aqueous solutions by modified loquat bark waste (MLB) has been investigated in a batch biosorption process. The biosorbent MLB was characterized by FTIR analysis. The extent of biosorption of Ni(II) ions was found to be dependent on solution pH, initial nickel ions concentration, biosorbent dose, contact time, and temperature. The exper...

Arsenic contamination in water poses a serious threat on human health. The tea fungus known as Kombucha is a waste produced during black tea fermentation. The objective of this study was to examine the main aspect of a possible strategy for the removal of arsenates employing tea fungal biomass. The pretreatment of biomass with FeCl3 was found to improve the biosorption efficiency. Arsenics upta...

The formation constants of the species formed in the systems H+ + cytidine 5-monophosphate (CMP)and H+ + cytidine 5-monophosphate + Tl (I) ion have been determined in aqueous solution in a widepH range of 1.5 to 10.5 at 25 °C and different ionic strengths ranging from 0.1 to 1.5 moldm-3NaClO4, NaNO3, and NaCl using potentiometric-spectrophotometric technique. The composition ofthe complexes was...

Rapid industrialisation, technological development, urbanization and increase in population in the recent past coupled with unplanned and unscientific disposal methods led to increased heavy metal levels in water. Realizing the need for development of eco-friendly and cost effective methods, the present investigation was done for the adsorptive removal of copper from aqueous solutions with Drom...

This study explored the feasibility of using granular ferric hydroxide as adsorbent for the removal of NO3-N. Optimum conditions for NO3-N removal were found to be pH 5.0 and equilibrium time 80min. The equilibrium sorption isotherm was better described by Langmuir sorption isotherm model. The maximum sorption capacity of granular ferric hydroxide was 4.254mg/g at 298K. A comparison of four kin...

This study investigated arsenate and arsenite adsorption on an iron(III) oxide/silica adsorbent that had a Fe/Si molar ratio of 3. Batch experiments were conducted with regard to adsorption kinetics, isotherms, pH effects and interference of phosphate and sulfate on arsenic adsorption. The adsorption of arsenite was faster than that of arsenate. The adsorption kinetics could be well described b...

Biochar converted from agricultural residues or other carbon-rich wastes may provide new methods and materials for environmental management, particularly with respect to carbon sequestration and contaminant remediation. In this study, laboratory experiments were conducted to investigate the removal of phosphate from aqueous solution by biochar derived from anaerobically digested sugar beet tail...

The adsorption of methyl tert-butyl ether by granular activated carbon was investigated. The experimental data were analyzed using the Freundlich isotherm and the Langmuir isotherm. Although equilibrium data were found to follow Freundlich isotherm model, it were fitted better by the Langmuir model with a maximum adsorption capacity of 204.1 mg/g. The kinetic data obtained at different concentr...

A series of activated carbons were prepared from agricultural waste sugarcane bagasse by chemical activation with zinc chloride (ZnCl2) as an activating agent at 500 degrees C and 0.5 h soaking time. The Langmuir surface area and total pore volume were used to estimate the average pore diameter of the carbon products. The values of the surface area and pore volume increased linearly with increa...

A biosorbent prepared from Ascophyllum nodosum seaweed biomass, FCAN2, was examined for its sorption capacity. Equilibrium batch sorption studies were performed using two-matal systems containing either (Cu + Zn), (Cu + Cd), or (Zn + Cd). In the evaluation of the two-metal sorption system performance, simple isotherm curves had to be replaced by three-dimensional sorption isotherm surfaces. In ...