Abstract: This study investigated the effects of different fiber contents by volume (0%, 1%, 2%, and 3%) on flowability, entrapped air content, and compressive and flexural strength of ultra high performance concrete (UHPC). Four water-to-binder ratios (0.18, 0.20, 0.22, 0.24) were used and four different dosages of superplasticizer were introduced for preparing each water-to-binder ratio mixtu...

Over a million tonnes of cigarette butts (CBs) are produced worldwide annually. These CBs accumulate in the environment due to the poor biodegradability of the cellulose acetate filters and pose a serious environmental risk. This paper presents some of the results from a continuing study on recycling CBs into fired clay bricks. Properties including compressive strength, flexural strength, densi...

This paper presents an analytical method considering the effects of fiber length and fiber orientation distributions for predicting the tensile strength (TS) of short-fiber-reinforced polymers (SFRP). Two probability density functions are used for modelling the distributions of fiber length and fiber orientation. The strength of SFRP is derived as a functiolz of fiber length and fiber orientati...

Our long-term goal is unchanged from last year. It is to learn how to predict the cloudiness, entrainment rate, and turbulent fluxes in the marine boundary layer under any and all large-scale conditions. In particular the effects of varying sea surface temperature, varying inversion strength, and varying mean winds must be included. The cloudiness types encompassed include fog, stratus, stratoc...

The objectives of this study were to develop composite films using various gelatin sources with corn oil (CO) incorporation (55.18%) and to investigate the mechanical and physical properties of these films as potential packaging films. There were increases (p < 0.05) in the tensile strength (TS) and puncture strength (PS) of films when the concentration of gelatin increased. The mechanical prop...

Ceramic waste is most commonly produce from ceramic industry, this waste is in the form of pest and hard form, pest waste is known as the filter waste or slurry waste, which is produced at the end of polishing and finishing of ceramic tiles. The paper discuss that ceramic slurry waste powder is replaced by cement in concrete. Concrete grade M25 was made by replacing by 0% to 30% of Ordinary Por...

Stone groundwood (SGW) is a fibrous matter commonly prepared in a high yield process, and mainly used for papermaking applications. In this work, the use of SGW fibers is explored as reinforcing element of polypropylene (PP) composites. Due to its chemical and superficial features, the use of coupling agents is needed for a good adhesion and stress transfer across the fiber-matrix interface. Th...

In this study, the benefits of limestone powder (LP) and marble powder (MP) as partial replacement of Portland cement are established. Furthermore, LP and MP are used directly without attempting any additional processing in the production of selfcompacting concrete (SCC). The water to binder ratio is maintained at 0.33 for all mixtures. The examined properties include workability, compressive s...