M. Suliga, R. Kruzel, Czestochowa University of Technology, Faculty of Production Engineering and Materials Technology, Czestochowa, Poland In the paper the influence of modification of patenting process on steel cord properties has been assessed. It was found that the wires of pearlite structure, in comparison to the wires of pearlite-bainite structure, characterized much better properties whi...

Bridges with reinforeerneut corrosion problems are now under careful inspection in Taiwan. Costly maintenance programs are underway and raising S"erious safety concem. There are various engineering solutions to salt-induced corrosion. Among them epoxycoated reinforcing bars, commonly referred to as rebar, are frequently used in marine environment and other areas due to its durability, reasonabl...

the development of nano/ultrafine bainitic structure in aisi 52100 steel was the goal of this study. for this purpose,the aisi 52100 the specimens were austenitized at 1050 °c for 60 min followed by low-temperature austemperingtreatment at different temperatures and times. the austempered samples were characterized using field emissionscanning electron microscopy (fesem), x-ray diffraction (xrd...

recently, bulk nano-structured materials produced by severe plastic deformation (spd) have attracted scientists attention.  materials produced by spd are of great importance because of (1) non-porous structure, (2) great mechanical properties such as high strength and toughness and (3) proper dimension for mechanical and physical testing.  several methods have been introduced for imposing the s...

Cylindrical Frictional Damper (CFD) is a new revolutionary frictional based mechanical damper. Unlike the other types of frictional dampers, CFDs do not utilize bolts to produce friction between contact surfaces. These dampers consist of two main parts, the inner shaft and the external cylinder. These two parts are assembled such that one is shrink-fitted inside the other. In this investigation...

The mechanical properties and microstructural developments of 321 stainless steel during thermomechanical process were investigated. The repetitive cold rolling and subsequent annealing were conducted to achieve nanocrystalline structure in an AISI 321 stainless steel. Heavily cold rolling at −20°C was conducted to form martensite in metastable austenitic steel. The process was followed by anne...

This study focuses on the semiconductor properties of passive films formed on AISI 420 stainless steel immersed in four nitric acid solutions under open circuit potential (OCP) conditions. For this purpose, the passivation parameters and semiconductor properties of passive films were derived from potentiodynamic polarization and Mott–Schottky analysis, respectively. The OCP plots showed that th...