introdouction: dentinal hypersensitivity (dh) is one of the most painful chronic problems reported in dental offices. various methods have been applied for the treatment of dh. however, majority of them are either ineffective or last for a short period of time. it has been reported that lasers, particularly neodymium- doped: yttrium aluminum garnet laser (nd: yag), can be helpful in the treatme...

We demonstrate the use of optical coherence tomography (OCT) as a non-destructive diagnostic tool for evaluating laser-processing performance by imaging the features of a pit and a rim. A pit formed on a material at different laser-processing conditions is imaged using both a conventional scanning electron microscope (SEM) and OCT. Then using corresponding images, the geometrical characteristic...

Visualisation of small fluid droplets at a high resolution in the scanning electron microscope is a challenging task, especially if they have to be observed at the interface between two solid substrates. This report describes a Cryo-SEM approach, successfully applied for visualising droplets of various fluids, deposited on the substrates or located at the interface between two surfaces. Fragile...

To achieve optimal mechanical properties in high manganese steels, the precipitation of nanoprecipitates of vanadium and niobium carbides is under investigation. It is shown that under controlled heat treatments between 850°C and 950°C following hot deformation, few-nanometre precipitates of either carbide can be produced in test steels with suitable contents of vanadium or niobium. The structu...

Tungsten-containing amorphous carbon films were produced by dual magnetron sputter deposition. The formation of carbide phases after heat treatment in inert gas at temperatures up to 2800 K was investigated by X-ray diffraction for tungsten concentrations below 25 at%. After deposition, each film consists of an amorphous carbon matrix with atomically dispersed W inclusions. Annealing up to 2800...

Hydroxyapatite nanorods aligned with ultrahigh crystallinity and high-yield were successfully synthesized through a hydrothermal approach. In this experiment, a new composition of cetyltrimethylammonium bromide ((CH3(CH2)15N+(CH3)3Br-) was designated as CTAP)/Ca(NO3)2/(NH4)2HPO4/NaOH and distilled water under hydrothermal condition, to synthesize single crystalHAp nanorods with diameter of 20 ±...

Natural Akermanite (NAM) has been successfully prepared by a modified sol-gel method. Optimization in calcination temperature and mechanical ball milling resulted in a pure and nano-sized powder which characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared Spectroscopy (FT–IR). Calcium nitrate, ...

The scanning electron microscope (SEM) is an electron microscope that produces an image of a sample by scanning it with a focused beam of electrons. The electrons interact with the atoms in the sample, which emit secondary electrons that contain information about the surface topography and composition. The sample is scanned by the electron beam point by point, until an image of the surface is f...

By simply crushing mineral grains, suspending the powder in a liquid, and dispersing the suspension on a suitable substrate, it is possible to collect adequate compositional and structural information to identify an unknown phase using a scanning electron microscope (SEM) equipped with an energydispersive X-ray spectrometer (EDS) and an electron backscatter diffraction system (EBSD). This techn...