This work focuses on stochastic modeling and simultaneous regulation of surface roughness and porosity for a porous thin film deposition process modeled via kinetic Monte Carlo (kMC) simulation on a triangular lattice. The microscopic model of the thin film growth process includes adsorption and migration processes. Vacancies and overhangs are allowed inside the film for the purpose of modeling...

CaO-P(2)O(5) glasses with additions of MgO and CaF(2) were used as a sintering aid of hydroxyapatite, and glass-reinforced hydroxyapatite composites obtained. Glasses promoted significant changes in the microstructure of the composites, namely with the formation of tricalcium phosphate secondary phases, beta and alpha-TCP. Quantitative phase analysis was performed by the Rietveld method using G...

Previous studies have found that variations in mixing technique can influence the porosity content of alginate impression material. The aim of this study was twofold: determine whether bubble formation in alginate is influenced by the sequence of water/powder addition prior to mixing, and to compare 4 different mixing techniques. Manual spatulation, an automated spinning bowl, a centrifugal mix...

Growth experiments have been carried out to characterize the occurrence and development of porosity in Bridgman and flux grown Al-Pd-Mn icosahedral quasicrystals. The porosity level has been observed to fluctuate between values of 0.0 and 3.75 percent along the length of Bridgman single crystals implying that the development of porosity is affected by the local growth conditions. Experiments we...

The substitution of matrix permeability for fracture permeability to simplify the simulation of complex fracture systems requires a radically different treatment of transport in the matrix. The spatial distribution of pressure is reasonably well described by inclusion of only the major fractures. Transport of tracer and heat, however, depends on a detailed knowledge of fluid velocities. These v...

In the membrane-based bioartificial livers developed up to now, the hepatic cells were located either in the fibers lumen or in the cartridge, with limited capacity for cell hosting. Here, we designed a polysulfone (PSU) membrane with a double porosity level: (i) surface macroporosity emerging in macrochambers accessible to hepatic cell colonization; (ii) microporosity to ensure gas and molecul...

The formation of microporosity in modified Al-Si alloys has been reviewed in the present study. A major concern in modification is the increased tendency to form microporosity in the macro-shrinkage free Al-Si alloy castings. It has also been demonstrated that at low hydrogen contents (0.1cc/ 100g, Al), where only shrinkage porosity should occur, the effect of Sr-modification on porosity conten...

Several techniques have been used for sand production control in sandstone reservoirs.The main objective of this research is to present a suitable resin to be used as a consolidation agent in oil reservoirs. To achieve this purpose, urea-formaldehyde resin, phenol-formaldehyde resin, and modified urea-formaldehyde resin were selected to be studied. Core samples were made by the sand sample prov...