Our former study reported that Fe-Sn spinel (Fe3-xSnxO4) was easily formed when SnO2 and Fe3O4 were roasted under CO-CO2 atmosphere at 900-1100 °C. However, the formation procedure is still unclear and there is a lack of theoretical research on the formation mechanism of the Fe-Sn spinel. In this work, the reaction mechanisms between SnO2 and Fe3O4 under CO-CO2 atmosphere were determined using ...

Lead halide perovskite solar cells (PSCs) appear to be the ideal future candidate for photovoltaic applications owing to the rapid development in recent years. The electron transport layers (ETLs) prepared by low-temperature process are essential for widespread implementation and large-scale commercialization of PSCs. Here, we report an effective approach for producing planar PSCs with Al3+ dop...

In this paper, the photocatalytic decoloration of Acid Red 27 (AR27) has been investigated using ultraviolet (UV) irradiation in presence of SnO2 nanoparticles. SnO2 nanoparticles were synthesized via hydrothermal process. The SnO2 nanoparticles' average crystallite sizes derived from X-ray analyses which were synthesized for 2, 12 and 24 hrs were about 3.73, 5.31 and 7.6 nm, respectively. Brun...

A thickness induced metal-insulator transition (MIT) was firstly observed in Sb-doped SnO2 (SnO2:Sb) epitaxial ultrathin films deposited on sapphire substrates by pulsed laser deposition. Both electrical and spectroscopic studies provide clear evidence of a critical thickness for the metallic conductivity in SnO2:Sb thin films and the oxidation state transition of the impurity element Sb. With ...

In this work, a synergistic effect of reduced graphene oxide (rGO) and polypyrrole (PPy) was studied in terms of their promotional role to enhance the capacity and cyclic stability of hollow SnO2 anodes in lithium-ion batteries. The core–shell structured hollow SnO2/rGO/PPy nanocomposites were synthesized using a hydrothermal method followed by an in situ chemical-polymerization route. Substant...

H2S gas sensing response characteristics of bare SnO2 thin films and heterostuctures with nanolayer (10 nm) of Cu and CuO are studied. Changes in resistance values, occurring with integration of Cu and CuO nanolayers on SnO2 is acquired real-time, and compared. Rise in sensor resistance after introduction of Cu and CuO nanolayers on SnO2 sensing layer is understood to enhance the sensing respon...

RF sputtered SnO2 thin films (90 nm thick) loaded with clusters of nanoscale (8 nm) metal catalysts (Pt, Ag, Ni, Pb, Al, Pd) are investigated for LPG detection. SnO2 film loaded with Pt catalyst clusters exhibits enhanced response (~ 7.5×10) to 200 ppm of LPG at a relatively low operating temperature (185C) with a fast response time of 100s. Variation of thickness of Pt clusters in the nanoscal...

A Fluidized Bed Metal–Organic Chemical Vapor Deposition (FB-MOCVD) process was developed for the growth of tin oxide thin films on large hollow Ni particles. Tetraethyl tin was used as tin source and dry air both as fluidization gas and oxidant reagent. The SnO2 films were grown in a FBCVD reactor under reduced pressure (13.3 kPa) in the temperature range of 633–663 K. A series of specific expe...

For atomic layer deposition (ALD) of doped, ternary, and quaternary materials achieved by combining multiple binary ALD processes, it is often difficult to correlate the material properties and growth characteristics with the process parameters due to a limited understanding of the underlying surface chemistry. In this work, in situ Fourier transform infrared (FTIR) spectroscopy was employed du...