This paper reports on the numerical analysis of a volumetric solar receiver-reactor for hydrogen production, using 2-step reduction–oxidation cycle. A detailed parametric sweep covering hundreds various parameter combinations is performed large reactor, transient physical model. We generate performance maps which are currently cost prohibitive via experimental or high–fidelity simulation studie...

a computational fluid dynamic (cfd) study of methanol (meoh) to dimethyl ether (dme) process in an adiabatic fixed-bed reactor is presented. one of the methods of industrial dme production is the catalytic dehydration of meoh. kinetic model was derived based on bercic rate. the parameters of this equation for a specific catalyst were tuned by solving a one-dimensional homogenous model using mat...

laguerre function has many advantages such as good approximation capability for different systems, low computational complexity and the facility of on-line parameter identification. therefore, it is widely adopted for complex industrial process control. in this work, laguerre function based adaptive model predictive control algorithm (ampc) was implemented to control continuous stirred tank rea...

Partial nitrification techniques, such as the continuously aerated SHARON process, have been denoted for quite a while as very promising for improved sustainability of wastewater treatment. Combination of such a SHARON process with the Anammox process, where ammonium is oxidised with nitrite to nitrogen gas under anoxic conditions, leads to cost-efficient and sustainable nitrogen removal from c...

The effects of application of zero valence Fe (Fe(0)) on the anaerobic digestion of sewage was investigated using two laboratory scale UASB reactors. One reactor had Fe(0) addition in a container found midway along the recycling loop. The other one was a control reactor. In a test run period of 76 days, the Fe(0) application significantly increased the CH, yield by 8.7% and decreased the efflue...

To better understand how cathode performance and substrates affected communities that evolved in these reactors over long periods of time, microbial fuel cells were operated for more than 1 year with individual endproducts of lignocellulose fermentation (acetic acid, formic acid, lactic acid, succinic acid, or ethanol). Large variations in reactor performance were primarily due to the specific ...

This paper reports the present status of the integrated performance achieved in tokamak experiments and critical issues towards DEMO reactor. The achieved integrated performance towards DEMO reactor is visualized using by introducing the radar-screen diagram with the normalized performance. The normalized plasma parameters foreseen in DEMO have been developed experimentally in world-wide, but t...

A multicomponent one-dimensional dynamic mathematical model for the reacting slurry systems with a change in gas flow rate due to the chemical reaction is developed. A change in gas flow rate caused by the chemical reaction is modeled using the overall gas mass balance. Thus, all relevant chemical species are included in the model. Linear first-order reaction kinetics is considered. The gas pha...

Steam reforming of ethanol in the membrane reactor using the Pd77Ag23 membrane was evaluated in Ni/CeO2 and Co/CeO2 at atmospheric pressure. At 673 K, the H2 yield in the Pd77Ag23 membrane reactor over Co/CeO2 was found to be higher than that over Ni/CeO2, although the H2 yield over Ni/CeO2 exceeded that over Co/CeO2 at 773 K. This difference was owing to their reaction mechanism. At 773 K, the...

Slow proliferation of anammox bacteria is a major problem limiting the wider application of anammox technology in practical wastewater treatment. A novel anammox reactor packed with a Fe electrode was developed for enhancing anammox consortium activity and accelerating the startup of anammox process. After 125 days' operation, total nitrogen removal rate achieved 1209.6 mg N/L/d in this hybrid ...