We propose a new scheme based on quantum dot-bimodal cavity coupling system to realize all-optical switch and logic gates in low-photon-number regime. Suppression of mode transmission due to the destructive interference effect is theoretically demonstrated by driving the cavity with two orthogonally polarized pulsed lasers at certain pulse delay. The transmitted mode can be selected by designin...

A compact UV pulsed laser pumped by high-power two-dimensional arrays of vertical-cavity surface-emitting lasers (VCSELs) was presented. A passively Q-switched 1064-nm Nd:YAG laser was side-pumped by kW-class 808-nm VCSEL pump modules and the output pulses were frequency quadrupled to 266-nm. 10-ns, 0.68-mJ UV pulsed output was obtained at 1.33k-Hz repetition rate. The average UV power is > 0.9...

In a specially designed radiation force balance (RFB), low-frequency pulse modulation of the incident ultrasound allows high-accuracy measurement of time-averaged spatially-integrated ultrasound power radiated into a reflectionless water load. Errors characteristic of force sensors are precluded by operating the RFB as a force comparator, without directly measuring force. Equipped with purpose-...

Pulsed energization of electrostatic precipitator (ESP) may represent one of the most promising solutions to comply with strict environmental regulation in case of high resistivity dust. Performs a parametric cost comparison between conventional and pulsed ESP with reference to four main industrial areas: electric power generation, cement manufacturing, iron and steel production, glass industry...

* This project is funded under the NASA-KSC STTR-Phase I Program. ABSTRACT A single-stage power factor correction converter with softswitching is proposed in this paper. The topology of this converter is derived by adding a resonant circuit to an existing Single-Stage, Single-Switch Power Factor Correction (S PFC) converter. As a result, zero-voltage-switching and zero-current-switching are ach...

This paper focuses on improving the energy conversion process for low-voltage energy harvester powered wireless sensors by optimising the conversion stages for pulsed sensor operation. The proposed circuit has been designed to operate efficiently with both a low-voltage low-power energy harvester source and a low-power pulsed load. This ensures that continuous conversion losses are kept to a mi...

This paper describes a pulsed electron gun that can be used as an FEL, as an injector for electron linear accelerators or for rf power generation. It comprises a 1 to 5 MeV, 1 to 2 ns pulsed power supply feeding a single diode, photoexcited acceleration gap. Beam quality of a ~ 1nC charge in ~ 1 GV/m field was studied. Computations of the beam parameters as a function of electrode configuration...

Abstract—An X-band active radial-waveguide pulsed power amplifier (PA) with high power and high power added efficiency (PAE) is designed, fabricated, and measured in this paper. A bandwidth of 1000 MHz with peak power level of 53.2 dBm at the frequency 9.85GHz, under the condition of 4 kHz pulse repeat frequency (PRF) and 10% of duty cycle, has been obtained by five-way radial waveguide power c...

High power factor, high frequency single stage single switch resonant inverter for the application of high frequency applications is presented in this paper. The power circuit is designed with a power factor corrector with single-switch current-fed high frequency resonant inverter. Number of switches used in conventional ballast circuits is reduced in single switch approach. SEPIC (Single ended...

This paper investigates the near field, far field and conducted electromagnetic emissions in a pulsed power supply circuit for a flash lamp pumped solid-state laser amplifier. The power supply consists of a charging circuit, which energizes 300 μF of energy storage capacitor bank to 3 kV. The stored energy is discharged through a flash lamp in the form of pulsed current. It is a single shot eve...