It is shown that an electrodeposited Zn-Ni-Cd alloy coating produced from sulfate electrolyte inhibits the discharge of hydrogen on carbon steel. The newly developed ternary alloys have approximately ten times higher corrosion resistance when compared to a Zn-Ni alloy. Hydrogen permeation characteristics of Zn-Ni-Cd alloy coatings were studied and compared with those of a bare and a Zn-Ni alloy...

Normal temperature tensile and fatigue tests were adopted to test the mechanical performance and fatigue life of 2524 aluminum alloy under the three states of T3, artificial aging, and creep aging, and scanning electron microscope and transmission electron microscope were also used to observe the fatigue fracture morphology and aging precipitation features of the alloy under the above three sta...

The effects of metal combinations on cytotoxicity were examined following dynamic extraction by freely gyrating two spherical metals in a glass vessel. The cell viabilities of an Au alloy, a Ag-Pd-Au alloy and Ti were little affected by combinations among three metals. Cell viability ranged between 60 and 80% when precious alloys were in combination with Co-Cr or Ni-Cr alloys. Ti showed a clear...

We report the synthesis of luminescent AuAg alloy quantum clusters (QCs) in bovine serum albumin (BSA), for the first time, with experimentally determined atomic composition. Mixing of the as-synthesized protein-protected Au and Ag clusters resulted in the formation of alloy AuAg clusters within the BSA. Mass spectrometric analysis of the product of a 1 : 1 molar ratio reaction mixture of Au(QC...

The hot deformation behavior and processing characteristics of AZ91 alloy and nano-SiCp/AZ91 composite were compared at temperature ranges of 523 K-673 K and strain rates of 0.001-1 s-1. Positive impact of SiC nanoparticles on pinning grain boundaries and inhibiting grain growth was not obvious when deformation temperature was below 623 K, but was remarkable when the temperature was above 623 K...

In order to study the initial corrosive changes of dental casting alloys in the mouth, the condition and composition of the proximal surface of the class II inlay were analyzed by the scanning electron microscope (SEM) and the electron probe microanalyser (EPMA). These analyses on the same small areas of the proximal surface were carried out every week for four weeks. The results were compared ...

We present here the findings of Alpha’s Alloy Development Program on the next generation of low temperature alloys that can be used in reflow soldering temperatures from 170 to 200C. Approaches in alloy development, test methodologies and results are discussed. The alloy properties targeted for improvements include: Alloy strength, alloy ductility, microstructure stability, improvements in ther...

Softcomag 49AA alloy consisting of 49 wt per cent Fe, 49 wt. per cent Co and 2 wt per cent V is a soft magnetic alloy with a combination of very high saturation magnetisation and high magnetostriction and used for several aeronautical applications such as generators (stators and rotors), fixed iron moving armature units etc. Though this alloy is brittle in nature, it can be formed into hot roll...

To improve the fretting damage (fretting wear and fretting fatigue) resistance of Ti-811 titanium alloy, three Cu/Ni multilayer films with the same modulation period thickness (200 nm) and different modulation ratios (3:1, 1:1, 1:3) were deposited on the surface of the alloy via ion-assisted magnetron sputtering deposition (IAD). The bonding strength, micro-hardness, and toughness of the films ...

UNLABELLED Cell culture system has been used to evaluate alloy cytotoxicity under different environments, testing the extracts, but the effect of temperature variation on the cytotoxicity of dental alloys has not been analyzed. OBJECTIVE The aim of the present study was to investigate if temperature variation could affect dental alloy cytotoxicity, testing alloy extracts in an epithelial cell...