A rapid and reproducible method for chloride estimation in urine is described. The colour produced is stable and obeys Beer's law over a wide range of concentrations using a simple colorimeter and filter. The method gives good agreement with both the potentiometric titration method of Sanderson (1952) and the mercurimetric titration method of Schales and Schales (1941). The precision of the col...

A bimodular planar O2 sensor was fabricated using NiO nanoparticles (NPs) thin film coated yttria-stabilized zirconia (YSZ) substrate. The thin film was prepared by radio frequency (r.f.) magnetron sputtering of NiO on YSZ substrate, followed by high temperature sintering. The surface morphology of NiO NPs film was characterized by atomic force microscope (AFM) and scanning electron microscope ...

A real-time telemetry system, which consists of readout circuits, an analog-to-digital converter (ADC), a microcontroller unit (MCU), a graphical user interface (GUI), and a radio frequency (RF) transceiver, is proposed for amperometric and potentiometric electrochemical sensors. By integrating the proposed system with the electrochemical sensors, analyte detection can be conveniently performed...

Novel solid-contact iodide-selective electrodes based on covalently attached 1,2,3 triazole ionic liquid (IL) were prepared and investigated in this study. Triazole-based IL moieties were synthesized using click chemistry and were further copolymerized with lauryl methacrylate via a simple one-step free radical polymerization to produce a "self-plasticized" copolymer. The mechanical properties ...

New polymeric membrane (PME) and coated graphite (CGE) copper(II)-selective electrodes based on 1-hydroxy-2-(prop-2'-enyl)-4-(prop-2'-enyloxy)-9,10-anthraquinone were prepared. The electrodes reveal linear emf-pCu2+ responses over wide concentration ranges (1.0 x 10(-5)-1.0 x 10(-1) M with a slope of 27.3 mV decade-1 for PME and 8.0 x 10(-8)-5.0 x 10(-2) M with a slope of 29.1 mV decade-1 for C...

Abstract This work presents a potentiometric approach for the detection of two cathinone derivatives, namely mephedrone (4‐MMC) and clephedrone (4‐CMC). Contrary to neutral‐carriers (dibenzo‐18‐crown‐6‐ether calix[4]arene), cation‐exchanger (tetraphenylborate sodium) as active component ion‐selective membrane showed near‐Nernstian response (+47 mV/decade from 1.7 ⋅ 10 −6 5.6 −4 mol l −1 ) selec...

The potentiometric response properties of ammonium-, carbonate-, and proton-selective electrodes prepared by incorporating appropriate neutral carriers within novel asymmetric cellulose acetate membranes are reported. The membranes are formed by first casting a thin layer of cellulose triacetate without carrier, hydrolyzing one side of this film with base, and then on the other side casting a s...

“S INTRODUCTION The concentration of sodium metabisulfite (Na2S2O5) in an ECP-2 bleach accelerator sample is determined by a manual or potentiometric titration using an iodine (I3) titrant. In the method an excess of iodine is added to the sample. Sodium metabisulfite and Kodak persulfate bleach accelerator, PBA-1, present in the sample react with a portion of the iodine. The iodine that did no...

Monitoring organic environmental contaminants is of crucial importance to ensure public health. This requires simple, portable and robust devices to carry out on-site analysis. For this purpose, a low-temperature co-fired ceramics (LTCC) microfluidic potentiometric device (LTCC/μPOT) was developed for the first time for an organic compound: sulfamethoxazole (SMX). Sensory materials relied on ne...

BACKGROUND Sperm motility evaluation is associated with fertility in IVF programmes. The visual estimation of sperm motility is extremely subjective. Hence, alternative methods are required. Among them, determination of mitochondrial membrane potential (Deltapsi(m)) changes of spermatozoa using potentiometric dyes may be a reliable test to determine sperm quality. However, the use of the potent...