OBJECTIVES This study sought to assess the effect of bracket base design on the shear bond strength (SBS) of the bracket to feldspathic porcelain. MATERIALS AND METHODS This in vitro, experimental study was conducted on 40 porcelain-fused-to-metal restorations and four different bracket base designs were bonded to these specimens. The porcelain surfaces were etched, silanized, and bonded to b...

Objectives Due to the increasing price of gold CAD/CAM titanium-ceramic restorations were developed to give alternative to the established metal-ceramic restorations with a high gold content. Despite the advantages of excellent biocompatibility, high corrosion resistance and appropriate strength titanium has made the casting process difficult caused by the high affinity of molten titanium to in...

Received Jul 10, 2017 Revised Oct 14, 2017 Accepted Oct 26, 2017 Overhead line insulators can be damaged for various reasons during their service life. Porcelain or glass insulators once damaged can affect the reliability of power system networks. This paper presents the study of voltage and electric characteristics along the surface of a broken porcelain insulator located in a string of 10 uni...

The porcelain insulators are investigated with the high voltage transmission line in outdoor condition. MATLAB finite element simulation used here to test performance of porcelain. PDE software is helpful modelling insulator two dimensional. pollution layer assumed be uniform. demonstrates electric field and potential distribution insulator. have higher near line. results represented as graphs....

OBJECTIVES Hydrofluoric (HF) acid etching increases the bond strength between composite resin and porcelain surfaces and has been advocated as a pre-cementation technique for ceramic restorations. The internal surface flaw distribution which is implicated in the premature failure of ceramic restorations is modified by the etching process and little agreement exists amongst researchers as to the...

Biocompatible materials used for the fabrication of dental crowns were studied. Patients were treated with Gold, Porcelain and Zirconia crowns. Dental crowns were selected according to patient’s clinical status and needs. We found that Gold crowns had low patient acceptance because of poor aesthetics and high cost. Gold crowns could not be used opposite to amalgam restorations for the fear of g...

introduction: failures might occur at metal‒porcelain interfaces as a problem with metal‒ceramic restorations even with the application of airborne-particle abrasion technique. this study was undertaken to evaluate the effect of nd:yag laser treatment on the bond strength of porcelain fused to metal. methods:  twenty-four cylindrical specimens (4 mm in diameter and 4 mm in height) were made of ...

0

There has been a re-explosion in the interest in aesthetic dentistry in the last 20 years. History teaches us that the interest in aesthetic dentistry tends to coincide with periods of relative affluence in society. Populist, if somewhat mindless, programmes like ‘Extreme Makeover’ and ‘Ten Years Younger’ have drawn the attention of the public to what aesthetic dentistry can offer. It is clear ...

Biocompatible materials used for the fabrication of dental crowns were studied. Patients were treated with Gold, Porcelain and Zirconia crowns. Dental crowns were selected according to patient’s clinical status and needs. We found that Gold crowns had low patient acceptance because of poor aesthetics and high cost. Gold crowns could not be used opposite to amalgam restorations for the fear of g...