We are presenting a new method of processing polystyrene-silica nanocomposites, which results in a very well-defined dispersion of small primary aggregates (assembly of 15 nanoparticles of 10 nm diameter) in the matrix. The process is based on the use of a high boiling point solvent, in which the nanoparticles are well dispersed, and a controlled evaporation procedure. The filler's fine network...

Abstract In the present work, flexural strength of Ti 3 Al(Si)C 2 -based composites was investigated at 25, 800 and 1000 °C using small punch technique. The were spark plasma sintered 1150 50 MPa from preceramic paper with powder filler. Sintered represent a multi-phase system secondary TiC Al O phases have more than 900 room temperature. It revealed that decreases to 690 MPa. At °C, further de...

This paper introduces a never before described strategy used by bilinguals to fill hesitation pauses. This strategy proved so unique that it was given the name ‘idiosyncratic filler.’ It describes a filler type that is produced unusually often by one individual when hesitating. It is usually a particular lexical filler that is used as often as or more often than all other lexical fillers combin...

Fillers are frequently used in beautifying procedures. Despite major advancements of the chemical and biological features of injected materials, filler-related adverse events may occur, and can substantially impact the clinical outcome. Filler granulomas become manifest as visible grains, nodules, or papules around the site of the primary injection. Early recognition and proper treatment of fil...

OBJECTIVE To explore experimental RBCs derived from a successful commercially available RBC (Grandio) to investigate resin monomer blend and filler parameters (volume fraction, density and diameter) on RBC performance. METHOD Six experimental RBCs modified from a commercial RBC were tested. The three-point flexure strength (σ(3)) and modulus (E) data was determined for groups of 20 bar-shaped...

The thermal conductivity of epoxy resin composites filled with combustion-synthesized hexagonal boron nitride (h-BN) particles was investigated. The mixing of the composite constituents was carried out by either a dry method (involving no use of solvent) for low filler loadings or a solvent method (using acetone as solvent) for higher filler loadings. It was found that surface treatment of the ...

and keloid scars; and laser treatment of leg veins. The role of botulinum toxin in the management of hyperhidrosis instead of intense pulsed light (IPL) and IPL-activated boswellia nanoparticles, and the novel contribution in corneotherapy as well as the methods of rejuvenation were emphasized. Mesotherapy has found application in medicine as well as in removing the signs of aging in people up ...

The aim of this study was to develop new soy protein drug delivery matrix systems by melt-processing techniques, namely, extrusion and injection moulding. The soy matrix systems with an encapsulated drug (theophylline, TH) were previously compounded by extrusion performed at two different pH values, (i) pH 4 (SIpDtp) and (ii) pH 7 (SIDtp), and further injection-moulded into a desired shape. Dur...

Layered double hydroxide (LDH) organo-modified by a surface-active monomer, 3-sulfopropyl methacrylate (SPMA) was used as filler for polystyrene (PS). Different nanocomposites SPMA/LDH:PS were prepared by bulk polymerization process using low amount of initiator. The two components, filler and polymer, as well as the degree dispersion of the reactive filler as a function of its loading in PS we...

For samples of polymethylmethacrylate with and without quartz filler, the inverse of the contrast-gloss ratio is shown to be related to surface roughness and to the optical scattering coefficient. This finding adds to the importance of optical scattering, which has been widely studied because of its relation to color and translucency of materials. Furthermore, optical scattering by composite fi...