نتایج جستجو برای: nio npsag clinoptilolite
تعداد نتایج: 4198 فیلتر نتایج به سال:
Metallic porous microtubes were obtained from commercial wires (200–250 μm diameter) of Cu-65Ni-2Fe, Cu-44Ni-1Mn and Cu-23Ni, alloys (wt. %) by surface oxidation at 1173 K in air, removal of the unoxidized core by chemical etching, and reduction in annealing in the hydrogen atmosphere. Transversal sections of the partially oxidized wires show a porous layered structure, with an external shell o...
The hazards of various types of nanoparticles with high functionality have not been fully assessed. We investigated the usefulness of biopersistence as a hazard indicator of nanoparticles by performing inhalation and intratracheal instillation studies and comparing the biopersistence of two nanoparticles with different toxicities: NiO and TiO₂ nanoparticles with high and low toxicity among nano...
It is necessary to study the optical properties of thin films to fabricate optoelectronic and interference devices. One of the methods in thin film preparation is the spray pyrolysis technique, which involves many technical aspects for the preparation of uniform coating. In the present study, Nickel Oxide (NiO) thin film is prepared by spray pyrolysis technique. NiO thin film was deposited usin...
In this study triggered-lightning induced fulgurites were formed in 99.9% pure binary oxides of manganese (MnO) and nickel (NiO) in order to study oxide reduction mechanisms. The fulgurite formation process involved packing the oxide in PVC holders and using the standard rocket-and-wire technique to trigger a lightning strike through the oxide at the International Center for Lightning Research ...
in this study metal oxide nano powder namely nio nanopowder was prepared .the producedmetal oxide was characterized and used as potential adsorbent for the removal of pb and zn from aqueoussolution. the rate of uptake of the pb and zn are rapid in the beginning and the time required for equilibrium adsorption is 120 min .the time of equilibrium as well as time required to achieve a definite fra...
The viability of applying bodipy sensitisers to NiO-based p-type dye-sensitised solar cells (p-DSCs) has been successfully demonstrated. The triphenylamine donor-bodipy acceptor design promotes a long-lived charge-separated state which is difficult to achieve with NiO-based devices. The current was above 3 mA cm(-2) and the IPCE was 28%.
Ultra-fast responding and recovering C(2)H(5)OH sensors were prepared using nanoscale SnO(2) hollow spheres with NiO-functionalized inner walls. The exceptional ultra-fast recovery characteristics were attributed to the catalytic surface reaction assisted by NiO at the inner shell.
Ultraselective and sensitive detection of xylene and toluene with minimum interferences of other indoor air pollutants such as benzene, ethanol, and formaldehyde is achieved using NiO hierarchical nanostructures doped with Cr. Pure and 1.15-2.56 at% Cr-doped NiO flower-like hierarchical nanostructures assembled from nanosheets are prepared by a simple solvothermal reaction and their gas sensing...
Multishelled NiO hollow microspheres for high-performance supercapacitors have been prepared and the formation mechanism has been investigated. By using resin microspheres to absorb Ni(2+) and subsequent proper calcinations, the shell numbers, shell spacing and exterior shell structure were facilely controlled via varying synthetic parameters. Particularly, the exterior shell structure that acc...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید