Lanthanum substituted Ni-Zn ferrite nanoparticles (Ni0.5Zn0.5LaxFe1-xO4; 0.00 ≤x≤ 1.00) synthesized by sol-gel method were presented. X-ray diffraction patterns reveal the typical single phase spinel cubic ferrite structure, with the traces of secondary phase for lanthanum substituted nanocrystals. In addition, the structural analysis also demonstrates that the average crystallite size varied i...

The assessment of heavy metal contaminants: Mn, Cr, V, Cu, Pb, Zn and Ni, was conducted on River Niger Floodplain soil at Jebba, Central Nigeria using Contamination Factor (Cf), Factor (AF), Enrichment Factor (EF), Geoaccumulation Index (Igeo) and Degree of Contamination (Cdeg). Random sampling method was adopted cutting across the entire floodplain and the samples were subjected to Inductively...

The adsorption of Cu, Cd, Ni, Zn, and Cr from synthetic solutions on powdered activated carbon (PAC), activated sludge, and dried sludge were investigated under laboratory conditions to assess its ability to remove heavy metals. The adsorption efficiency increased rapidly within the first 30 min and then slowed down as it approached a steady state after 5 h of contact time. The results showed t...

The present study investigates the concentration of Pb, Cd, Ni, Zn, and Cu in the paddy field soils collected from Tumpat, Kelantan. Soil samples were treated with sequential extraction to distinguish the anthropogenic and lithogenic origin of Pb, Cd, Ni, Zn, and Cu. ELFE and oxidizable-organic fractions were detected as the lowest accumulation of Pb, Cd, Ni, Zn, and Cu. Therefore, all the heav...

The waste water showed high values of total solid (TS), hardness and chloride with slightly alkaline pH along with high concentrations of Cr (2.03 mg l(-1)), Ni (1.59 mg l(-1)) and Zn (0.46 mg l(-1)). The concentration of Cu (0.21 mg l(-1)) and Zn in industrial waste water was low than Ni and Cr. The diluted (25 and 50%), undiluted (100%) waste water was used to irrigate the lettuce plants grow...

Effluent from electroplating industry contains various heavy metals like Cd, Cr, Cu, Ni and Zn, which are used in electroplating process of industry. Effluent was slightly greenish in colour and pungent in odour. Physico-chemical properties like total suspended solids (TSS), total solids (TS), alkalinity, Biological oxygen demand (BOD), and Chemical oxygen demand (COD) showed higher values in e...

The removal of heavy metals (Cr, Cu, Zn, Ni and Pb) from anaerobically digested sludge from the Yuen Long wastewater treatment plant, Hong Kong, has been studied in a batch system using isolated indigenous iron-oxidizing bacteria. The inoculation of indigenous iron-oxidizing bacteria and the addition of FeSO4 accelerated the solubilization of Cr, Cu, Zn, Ni and Pb from the sludge. pH of the slu...

We evaluated the levels of essential elements as Cu, Cr, Fe and Zn, and toxic elements as Al, Ni, Pb and Cd in a total of 40 samples of different legumes and 56 samples of different nuts, that are widely consumed in Spain. These elements were determined in the samples mineralized with HNO(3) and V(2)O(5), using electrothermal atomic absorption spectrometry (ETAAS) as the analytical technique. R...

Adults of freshwater ostracod Stenocypris major (Crustacea, Candonidae) were exposed for a four-day period in laboratory conditions to a range of copper (Cu), cadmium (Cd), zinc (Zn), lead (Pb), nickel (Ni), iron (Fe), aluminium (Al), and manganese (Mn) concentrations. Mortality was assessed, and median lethal times (LT(50)) and concentrations (LC(50)) were calculated. LT(50) and LC(50) increas...

Forty-six bacterial cultures, including one culture collection strain, thirty from the rhizosphere of Alyssum murale and fifteen from Ni-rich soil, were tested for their ability to tolerate arsenate, cadmium, chromium, zinc, mercury, lead, cobalt, copper, and nickel in their growth medium. The resistance patterns, expressed as minimum inhibitory concentrations, for all cultures to the nine diff...