The experimental melting transition of finite two-dimensional dust clusters in a dusty plasma is analyzed using the method of instantaneous normal modes. In the experiment, dust clusters are heated in a thermodynamic equilibrium from a solid to a liquid state using a four-axis laser manipulation system. The fluid properties of the dust cluster, such as the diffusion constant, are measured from ...

The effect of a Nd: YAG laser (1064 nm) has been studied on Ti6Al4V alloy in terms of optical and physical parameters for biomedical applications. The superior surface microhardness hardness (i.e. 377 VHN) is attributed to grain refinement associated with laser melting and rapid solidification. The electrochemical property, mainly pitting corrosion resistance, has been carried out in Hanks salt...

We report on the formation of organized sub-micron YBa(2)Cu(3)O(7) (YBCO) dots induced by irradiating femtosecond laser pulses on YBCO films prepared by pulse laser deposition with fluence in the range of 0.21 approximately 0.53 J/cm(2). The morphology of the YBCO film surface depends strongly on the laser fluences irradiated. At lower laser fluence (approximately 0.21 J/cm(2)) the morphology w...

Molecular/atomic-level computer modeling of laser–materials interactions is playing an increasingly important role in the investigation of complex and highly nonequilibrium processes involved in short-pulse laser processing and surface modification. This chapter provides an overview of recent progress in the development of computational methods for simulation of laser interactions with organic ...

The corrosion behaviour of AlSi10Mg alloy produced by selective laser melting (SLM) under two different atmospheres, namely argon and nitrogen, was compared to that had been cast. present study demonstrates the systematic electrochemical selective-laser-melted (SLMed) AlSi10Mg. Potentiodynamic polarisation impedance spectroscopy (EIS) were used investigate behaviour, illustrating degrading feat...

Silicon isotope ratios of a typical CAI from the Leoville carbonaceous chondrite, obtained in situ by laser ablation MC-ICPMS, together with existing Mg/Mg data, reveal a detailed picture of the astrophysical setting of CAI melting and subsequent heating. Models for the chemical and isotopic effects of evaporation of the molten CAI are used to produce a univariant relationship between PH2 and t...

TaC, HfC and their solid solutions are promising candidate materials for thermal protection structures in hypersonic vehicles because of their very high melting temperatures (>4000 K) among other properties. The melting temperatures of slightly hypostoichiometric TaC, HfC and three solid solution compositions (Ta1-xHfxC, with x = 0.8, 0.5 and 0.2) have long been identified as the highest known....

In a recent laser light-scattering study on the “globule-to-coil” transition (melting) of a single poly(Nisopropylacrylamide) (PNIPAM) linear chain in water (the solution is in the stable one-phase region at all temperatures), we observed that at the initial melting stage the ratio of the hydrodynamic radius to the radius of gyration underwent an unexpected maximum s,1.61d which is even higher ...