In this study, adsorption of copper from aqueous solutions was investigated using mangrove biomass from the Kenyan Coast. The efficacy of mangrove biomass on the removal of copper (II) ions from aqueous solutions was investigated in single state in batch mode with respect to effects of initial pH, temperature, initial concentration of the metal ion, adsorbent dosage and contact time on metal io...

In recent years, biosorption is being considered as an environmental friendly technology for the recovery of rare earth metals (REE). This study investigates the optimal conditions for the biosorption of neodymium (Nd) from an aqueous solution derived from hard drive disk magnets using green microalgae (Chlorella vulgaris). The parameters considered include solution pH, temperature and biosorbe...

The magnetic NiFe2O4 nanoparticles have been synthesized and used as adsorbents for removal of an azo dye, Eriochrome black-T (EBT) from aqueous solution. The NiFe2O4 nanoparticles were characterized by scanning electron microscope (SEM), Transmission electron microscope (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectra (FTIR). The adsorption studies were carried out under v...

Triphenylmethane (TPM) dye is one of the most prevalent and recalcitrant water contaminants. Magnetic reduced graphene oxide (rGO) is an efficient adsorbent for organic pollutants removal. However, the performance and adsorption kinetics of magnetic rGO towards TPM have not yet been studied. In this study, a magnetic Fe3O4@rGO nano-composite, which could be easily removed from water with a simp...

Clay minerals are widespread in natural systems and have been widely used for the removal of pollutants. In this study, natural expanded vermiculite was used in adsorption tests to remove ammonium nitrogen from landfill leachate. The modification of vermiculite was carried out using NaOH and HCl, and for both modifications the best concentration was 0.1 mol/L. The results produced by XRD (X-ray...

The kinetics and isotherm studies of the immobilized lipase and the mechanism of immobilization on chitosan beads and activated chitosan beads with glutaraldehyde were investigated. The effect of glutaraldehyde on porosity of chitosan was evaluated by FESEM analysis. It was observed that the porosity of the carrier which has activated by glutaraldehyde was substantially increased. The validity ...

Modeling and simulation of unconventional reservoirs are much more complicated than the conventional reservoir modeling, because of their complex flow characteristics. Mechanisms, which control the flow in the reservoir, are still under the investigation of researchers. However, it is important to investigate applications of mechanisms which are present to our knowledge. This paper presents the...

A low cost adsorbent Fly Ash was used for the removal of Reactive Red 194 dye (RR 194 dye) from textile effluent. The Fly ash was activated by chemical treatment by N/2 H2SO4. Batch adsorption experiments were performed as functions of adsorbent doses, initial dye concentration, contact time, and pH. The percentage of colour removal was increased with decreasing dye concentration and increasing...

This paper describes the adsorption of two organic (acetic and citric) acids on the blast furnace sludge, a representative by-product of the steelmaking industry. By PIXE, XRD, BET and SEM methods, it was shown that blast furnace sludge is a complex heterogeneous material with a specific surface area of s = 31.46 m g, composed mainly of amorphous phase (w = 76.2 %), calcite (w = 9.9 %), magneti...

Activated carbons are extremely versatile adsorbents for major industrial significance, especially for metal ions recovery from wastewaters. In this study, the activated carbon prepared from the hard shell of apricot stones, an agricultural solid, which was used for the gold recovery from gold-plating wastewater is investigated. Activated carbon was produced by chemical activation with phosphor...