This paper presents the results of studies on the influence of oxygen partial pressure (vacuum level in the chamber) on the properties of FeAl intermetallics. One of the problems in the application of classical methods of prepared Fe-Al intermetallic is the occurrence of oxides. Applying a vacuum during sintering should reduce this effect. In order to analyze the effect of oxygen partial pressu...

Potential mapping measurements have been performed on passive surfaces in air using an Atomic Force Microscopy based technique, the Scanning Kelvin Probe Force Microscope (SKPFM). A linear relation was found between the potential measured this way and the corrosion potential in aqueous solution for a range of pure metals. The SKPFM can be considered to map the practical nobility of the surface....

We discuss flux pinning and nanostructural analyzes of two intermetallic superconductors that exhibit substantial deviations from the usual flux-shear behavior. Kramer plots for a MgB 2 thin film, which contained a substantial fraction of MgO nanoprecipitates, show an additional component that is attributed to core pinning by the precipitates. Also, polycrystalline MgCNi 3 displays a crossover ...

Ti-Al-Si alloys are prospective material for high-temperature applications. Due to low density, good mechanical properties, and oxidation resistance, these intermetallic alloys can be used in the aerospace and automobile industries. Ti-Al-Si alloys were prepared by powder metallurgy using reactive sintering, milling, and spark plasma sintering. One of the novel SPS techniques is high-pressure s...

The increasing worldwide energy consumption calls for the design of more efficient energy systems. Thermoelectrics could be used to convert waste heat back to useful electric energy if only more efficient materials were available. The ideal thermoelectric material combines high electrical conductivity and thermopower with low thermal conductivity. In this regard, the intermetallic type-I clathr...

The high plasticity of metallic glasses is highly desirable for a wide range of novel engineering applications. However, the physical origin of the ductile/brittle behaviour of metallic glasses with various compositions and thermal histories has not been fully clarified. Here we have found that metallic glasses with compositions at or near intermetallic compounds, in contrast to the ones at or ...

Keywords: Shear strength Microstructure Single-shear lap joint Intermetallic compound (IMC) Aging a b s t r a c t The effects of isothermal aging on the microstructure and shear strength of Sn37Pb/Cu solder joints were investigated. Single-lap shear solder joints of eutectic Sn37Pb solder were aged for 1–10 days at 120 °C and 170 °C, respectively, and then loaded to failure in shear with a cons...

Intermetallic compounds or solid solutions can form between Zr and Mo/W, in which the multiphase of diffusion may be influenced by each other. Interdiffusion kinetic data such intermetallic systems are highly demanded for material design. In this work, solid–solid couples Zr-Mo Zr-W were prepared fixture method, interdiffusion behaviors at 1300–1500 °C systematically investigated. The results s...