This paper reports the design, fabrication and measurement techniques for a set of low-loss slotted waveguides. The waveguides are fabricated based on micro metal additive manufacturing technology. They were layer by in one piece without need post-fabrication assembly. As examples, straight WR-3.4 (220-330°GHz) WR-2.2 (330-500°GHz) bands tested. Measurement results show insertion loss per unit ...

Variable polarization compensation has been demonstrated at 100 GHz. The device consists of two interlocking V-groove artificial dielectric gratings that produce a birefringence that varies with the separation distance. A maximum retardance of 74 has been obtained experimentally in a silicon device, in good agreement with rigorous coupled-wave computer simulations. Further simulations predict t...

This paper introduces a new concept in RF MEMS switches intended for high RF signal power applications at millimetre-wave operation. The novel SPST switch architecture employs electrothermal hydraulic microactuators. Out-of-plane silicon levers, having spring action and latching mechanisms, have been designed to create an OFF-state gap separation distance of 250 μm between ohmic contact electro...

In this letter, a 60GHz tandem coupler using offset broadside-coupled lines is proposed on a silicon-based integrated passive device technology. Over the frequency band of 57–66GHz, the measured insertion loss, amplitude imbalance, input return loss, isolation and phase error of the designed tandem coupler are better than 0.67 dB, 0.31 dB, 27.9 dB, 29.7 dB and 3.7◦ respectively. To the best of ...

The paper discusses the design aspects of capacitive RF MEMS Symmetric Toggle Switch (STS) with particular emphasis on device compactness, reliability, and improvement in isolation & insertion loss by incorporating hafnium dioxide (HfO2) as a dielectric material. The major impact of the change from SiO2 to HfO2 having dielectric constant of 20, is the reduction in overall dimensions of the swit...

Epidural catheters (EC) are often used in pediatric patients for intraoperative and postoperative pain relief. The small anatomical structures and catheter insertion under general anesthesia make it more difficult to perform EC and to prevent damage. In this study we investigated the use of ultrasound (US) in detecting neuraxial structures during insertion and placement of EC in children. ASA I...

A broadband millimetre-wave passive spatial combiner using a microstrip probe array and an oversized coaxial waveguide is successfully designed and tested. The equivalent circuit approach of transverse electromagnetic (TEM) lines is adopted to synthesise the coaxial stepped impedance transformer from a K connector with the oversized coaxial waveguide and to analyse the microstrip probe array. T...

a filtering power divider/power combiner based on half mode substrate integrated waveguide technology for high power applications is proposed. this design includes one half mode substrate integrated waveguide cavity, one matched load, and four sections of quarter-wavelength transmission lines. the high isolation between output ports is obtained by combining the half mode substrate integrated wa...

This paper describes the development of a heterojunction AlGaAs/GaAs PIN diode as a revolutionary improvement as compared to the homojunction GaAs PIN diode commonly used in microwave systems for commercial and military applications. In a heterojunction device the injected carriers from the junction are confined by the bandgap discontinuity between the AlGaAs/GaAs layers. This confinement effec...