objective(s): the aim of this study was to synthesis new dental nanocomposites reinforced with fabricated glass nanoparticles and compare two methods for fabrication and investigate the effect of this filler on mechanical properties. materials and methods: the glass nanoparticles were produced by wet milling process. the particle size and shape was achieved using psa and sem. glass nanoparticle...

OBJECTIVES The purpose of this study was to evaluate the influence of surface treatment and different types of composite resin on the microshear bond strength of repairs. MATERIALS AND METHODS Seventy-two specimens (n=72) were prepared using a nanoparticle resin and stored in artificial saliva at 37 ± 1°C for 24 h. After this period, the specimens (n=24) were restored with microhybrid resin P...

blown bitumen (110/10) was mixed with heavy vacuum slops (h.v.s), 60/70 penetration grade bitumen and recycled isotactic polypropylene (ipp) at different levels. the resulting resins were used to impregnate non-woven poly(ethylene terephthalate) fibers to form composites. the modulus and penetration grade of the resulting bituminous resins were determined. it was found that these bituminous res...

The effects of starch and aging on the mechanical properties of starch/poly(hydroxyester ether) (PHEE) composite materials were characterized. Native or modified cornstarches were extruded with PHEE. Composites were aged for up to 20 months at either 23°C and 50% relative humidity (RH) or over calcium sulfate to keep the composites dry. The tensile strength (TS) of the composites was affected b...

The aim of this study was to evaluate the shear bond strengths of pre- and untreated resin core materials to lithium disilicate ceramics. Bond strengths to dental hard tissues served as controls. Ceramic cubes (IPS-Empress II) were luted either with a one-step (Variolink II/Excite DSC) or multiple-step total etching bonding system (Tetric Flow/Syntac Classic) to ground surfaces of human enamel,...

Mechanical properties of hybrid braided composite rebars are evaluated and compared to theoretical predictions which account for specific processing parameters including yarn size, braiding machine setup, and fiber type. Using a combination of high modulus carbon (Thornel P-55S) and aramid (Kevlar 49) fibers bars have been produced of up to 10 mm diameter with a Young's modulus of 200 GPa, a bi...

In this article, hybrid composite laminates with shape memory alloy (SMA) and glass fiber (GF) as the reinforced phase, and epoxy resin as the host material, were manufactured by vacuum-assisted resin injection (VARI) processing. The SMA wires were embedded into the GF/epoxy composites with three kinds of modes. The effect of SMA content and the position on the flexural, low-velocity impact per...

BACKGROUND Composite resin restorations may have a short lifespan due to the degradation of resin-dentin interface. Ethanol wet bonding technique may extend the longevity of resin-dentin bond. The purpose of this one year randomized clinical trial was to compare clinical performance of two adhesives with ethanol wet bonding technique. MATERIALS AND METHODS This randomized clinical trial was p...