This article describes a self-healing coating for corrosion protection of metals, which combines two different types of self-healing mechanisms in one coating with multiple-healing functionality. 2-Mercaptobenzothiazole (MBT) was loaded into layered double hydroxide (LDH) carriers that were mixed into an acrylated polycaprolactone polyurethane-based shape-recovery coating and applied on hot-dip...

The effects of metallurgical factors on the aqueous corrosion behavior of highentropy alloys (HEAs) are reviewed in this article. Alloying (e.g., Al and Cu) and processing (e.g., heat treatments) effects on the aqueous corrosion behavior of HEAs, including passive film formation, galvanic corrosion, and pitting corrosion, are discussed in detail. Corrosion rates of HEAs are calculated using ele...

Hot corrosion performance of Atmospheric Plasma Spray (APS) and Detonation spray (DSC) CoCrAlY, NiCoCrAlY, NiCr coatings on T91 steel were investigated at 650 °C for 100 cycles under Na2SO4-K2SO4-Fe2O3 mixed salt deposit in ambient air. The hot resistance DSC was found to be superior their APS counterparts. Chromia spinel oxides provided excellent while no ?-Al2O3 observed. NiCoCrAlY offered th...

Corrosion is a natural process that seeks to reduce the binding energy in metals. The end result of corrosion involves a metal atom being oxidized. Surface corrosion on aluminum aircraft skins, near joints and around fasteners, is often an indicator of buried structural corrosion and cracking In this paper we proposed a new method on which we are moving towards designing a method to detect the ...

Metallic materials in practical use are normally exposed to corrosion in the atmospheric and aqueous environments. Metallic corrosion is one of the problems we have often encountered in our industrialized society; hence it has been studied comprehensively since the industrial revolution in the late eighteenth century. Modern corrosion science was set off in the early twentieth century with the ...

In this paper, a new kind of carbon steel (CS) and stainless steel (SS) galvanic sensor system was developed for the study of rebar corrosion in different pore solution conditions. Through the special design of the CS and SS electronic coupons, the electronic resistance (ER) method and zero resistance ammeter (ZRA) technique were used simultaneously for the measurement of both the galvanic curr...

To investigate the gradual failure of high-density polyethylene (HDPE) geomembrane as a result of long-term corrosion, four dynamic corrosion tests were conducted at different temperatures and durations. By combining tension and puncture tests, we systematically studied the variation law of tension and puncture properties of the HDPE geomembrane under different corrosion conditions. Results sho...

There are different zinc coating technologies for corrosion protection of metal surfaces. The most widespread methods are hot dip galvanizing (zincing by dipping items into melted zinc) and electrolytic method by zinc deposition from the electrolytic solution (electroplating). The process of thermo-diffusion of a zinc coating is a newer process that forms a zinc alloy with the substrate. The US...

The corrosion performance of alloys in coal gasification systems is of increasing industrial interest as more advanced coal-fired power generating systems are developed. It is necessary to consider the performance of candidate materials under likely exposure conditions to ensure that components have adequate lifetimes. Materials performance can influence the economic feasibility of these system...

Eight retrieved metal-on-metal total hip replacements displayed corrosion damage along the cobalt-chromium alloy liner taper junction with the Ti alloy acetabular shell. Scanning electron microscopy indicated the primary mechanism of corrosion to be grain boundary and associated crevice corrosion, which was likely accelerated through mechanical micromotion and galvanic corrosion resulting from ...