The clotting protein von Willebrand factor (VWF) binds to platelet receptor glycoprotein Ibα (GPIbα) when VWF is activated by chemicals, high shear stress, or immobilization onto surfaces. Activation of VWF by surface immobilization is an important problem in the failure of cardiovascular implants, but is poorly understood. Here, the authors investigate whether some or all surfaces can activate...

The effect of high shear rate on the mechanical properties polyethylene (PE), poly(ethylene terephthalate) (PET), polystyrene (PS) and polypropylene (PP) waste blend was investigated. process carried out at a temperature 120°C using counter-rotating twin-screw extruder. A constant screw speed 250 rpm weight ratio PE/ PET/PS/PP components 1:1:1:1 were used. preliminary research showed that had n...

Inertial focusing is a phenomenon where particles migrate across streamlines in microchannels and focus at well-defined, size dependent equilibrium points of the cross section. It can be taken into advantage for focusing, separation and concentration of particles at high through-put and high efficiency. As particles decrease in size, smaller channels and higher pressures are needed. Hence, new ...

Hyper-crosslinked (HCL) polystyrenes show outstanding properties, such as high specific surface area and adsorption capability. Several researches have been recently focused on tailoring their performance for specific applications, such as gas adsorption and separation, energy storage, air and water purification processes, and catalysis. In this review, main strategies for the realization of HC...

In this study, polystyrene ethylene butylene polystyrene (PSEBS) was functionalized to prepare mono and bipolar ion exchange membranes. In the case of the bipolar membrane, platinum was used as the intermediate layer. NaCl solution of concentration ranging from 5 g/L to 25 g/L was used as the feed solution. A commercially procured ion exchange membrane made of polystyrene divinyl benzene was al...

The increasing quantities of plastics and their disposal has been a major public concern. This paper therefore describes fixed bed co-pyrolysis system designed fabricated to obtain liquid fuel from combination Jatropha seed cake polystyrene (plastic) waste using appropriate standard technique. characterization the feedstock materials (Jatropha polystyrene) were carried out based on proximate ul...

Polystyrene nanoparticles stained with squaraine catenane endoperoxide exhibit remarkably high chemiluminescence and enable optical imaging of biodistribution in living mice. Whole-body chemiluminescence imaging was much more effective than fluorescence at identifying lung accumulation of the nanoparticles.

Organic electron beam resists are typically not resistant to the plasma etching employed to transfer the pattern into the underlying layer. Here, the authors present the incorporation of a metal hard mask material into negative resist polystyrene by co-evaporation of the polystyrene and the metal onto a substrate. With a volume ratio of 1:15 between Cr and polystyrene, this nanocomposite resist...

Mechanical cues present in the ECM have been hypothesized to provide instructive signals that dictate cell behavior. We probed this hypothesis in osteoblastic cells by culturing MC3T3-E1 cells on the surface of type I collagen-modified hydrogels with tunable mechanical properties and assessed their proliferation, migration, and differentiation. On gels functionalized with a low type I collagen ...