A pilot study was designed to examine the impact of nutrient levels, pipe materials, and disinfection on the survival of M. avium in model drinking water distribution system biofilms. Studies showed that the survival of the organism was dependant upon a complex interaction between pipe surface, nutrient levels, and disinfectants. The findings showed that when no disinfection was applied, M. avi...

One way to increase the heat transfer is to use perforated twisted tapes with different hole diameters, which largely improve heat transfer with an increase in the heat transfer area at the constant volume and more mixed flow. In the previous studies, the effect of nanofluids with perforated twisted tapes is less studied. In this work, the performance of water / iron oxide nanofluid in a double...

In a Distributed Thermal Response Test (DTRT) the ground thermal conductivity and borehole thermal resistance are determined at many instances along the borehole. Here, such a test is carried out at a 260 m deep water filled energy well, equipped with a U-pipe borehole heat exchanger, containing an aqueous solution of ethanol as working fluid. Distributed temperature measurements are carried ou...

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for ...

An underdeveloped class of oscillatory passive heat transport cycles are discussed that have the potential to transport significantly higher heat loads than current heat pipes. Prototype cycles employing inferior working fluids have demonstrated transport of higher heat loads over significantly greater distances than similarly sized heat pipes (including CPLs and LHPs) employing ammonia. Most o...

Experimental investigations of heat transfer coefficient of CuO/Water nanofluid are reported in this paper. The heat transfer coefficient of the CuO/water was measured with the help of double pipe heat exchanger. The nanofluid was prepared by dispersing a CuOnano particle in deionized water. CuO/water nanofluid with a nominal diameter of 27nm at different volume concentrations (0.1 &0.3 vol.%) ...