Heat exchangers are widely used in power engineering and industrial applications, many techniques such as coiled tube, surface tension devices, rough surfaces, extended surfaces have been investigated to enhancethermal performance and to minimize the cost and size of the heat exchanger equipment. One of the most important techniques is tube insert. In general,tube inserts can be classified into...

the paper studies optimization of shell-and-tube heat exchangers using the particle swarm optimization technique. a total cost function is formulated based on initial and annual operating costs of the heat exchangers. six variables – shell inside diameter, tube diameter, baffle spacing, baffle cut, number of tube passes and tube layouts (triangular or square) – are considered as the design para...

Ground Source Heat Hump is one of the emerging technic to utilize the reservoir of geothermal energy in Europe. The crucial factor is to find the optimal length of the borehole to successfully design a heating system. The length of the borehole varies depending on the geographical area, the capacity of the heat pump and heat load of the desired building in consideration. Several methods have be...

Micro-scale silicon heat exchangers were designed, modeled using conventional heat transfer and fluid mechanics correlations, fabricated in the MIT Microtechnologies Laboratory, and tested as part of the MIT micro-gas turbine engine project. Heat transfer and pressure drop experiments were carried out to measure the performance of these heat exchangers, and to validate the predictions of the mo...

In the present work, the performances of improved two-stage multi inter-cooler trans- critical carbon dioxide (CO2) refrigeration cycles with ejector and internal heat exchanger have been examined. In the new improved cycles, an internal heat exchanger is append to the cycles. Also, second inter-cooler in improved cycles, cooled with the refrigeration of the cycle, so that in first c...

Improving heat transfer and performance in a radial, finned, shell and tube heat exchanger is studied in this study. According to the second law of thermodynamics, the most irreversibilities of convective heat transfer processes are due to fluid friction and heat transfer via finite temperature difference. Entransy dissipations are due to the irreversibilities of convective heat transfer. There...

in this work, the characteristics of flow and heat transfer of a fluid containing nano particles of aluminum oxide with the water volume fraction (0.1-0.2-0.3)(v/v) percent of the reports. the overall heat transfer coefficient, heat transfer and the average heat transfer fluid containing nano water - aluminum oxide in a horizontal double pipe counter flow heat exchanger under turbulent flow con...

The classical substances as Hydrochlorofluorocarbons (HCFCs) used as working fluids in the vapour compression plants have to be replaced by new substances because of their ozone depletion potential and their greenhouse effect. Carbon dioxide (CO2) is non-toxic, non-flammable, has zero ozone depletion potential and negligible global warming potential as refrigerant. Referring to a transcritical ...

Fouling of heat exchangers is a severe problem in the industrialized world. The effects of fouling are reduced energy efficiency and increased greenhouse gas emissions. In fact, any heat transfer process has a risk of fouling on the heat transfer surface. The fouling can in some cases be cleaned physically, chemically or burned off; in other cases it may not be possible to clean the heat exchan...