In an electrical Power systems, a load with a low power factor draws more current than a load with a high power factor for the same amount of useful power transferred. Linear loads with low power factor (induction motor) can be corrected with a passive network of capacitors or inductors. The hysteresis current controller is used to track the line current command. Non-linear loads (rectifier) di...

A class-F high efficiency GaN power amplifier (PA) for dual band operation at 2.14 GHz and 2.35 GHz is proposed. A novel dual band harmonic-rejection load network, which controls the terminating impedances of the second and third harmonics, and contributes greatly to efficiency improvement of PA, is described. In addition, a matching network which guarantees the high efficiency and gain of PA f...

Axial vibration effect of shell particles on dynamic stability of a cantilevered cylindrical shell under an axial follower force was addressed. In spite of free-ended shells, the reduced axial force under this effect cannot be derived analytically. Instead, an approximate method was proposed based on the fact that the static (and harmonic) axial deformation under an axial load in a free-ended b...

Matrix converter is a single-stage converter which directly connects a three-phase voltage source to a three-phase load without dc-link components. Therefore, any harmonic distortion and imbalance in input voltage directly reflect to the output of the converter. Recently, many researchers have made an effort to cope with this problem. In this paper, under distorted input voltage conditions, beh...

Matrix converter is a single-stage converter which directly connects a three-phase voltage source to a three-phase load without dc-link components. Therefore, any harmonic distortion and imbalance in input voltage directly reflect to the output of the converter. Recently, many researchers have made an effort to cope with this problem. In this paper, under distorted input voltage conditions, beh...

1,2 Electrical and Electronics Engineering, Sree Buddha College Of Engineering Abstract—This paper highlights the performance of a five level inverter fed ac drive system. The presence of harmonics in the output voltage and current waveforms of traditional voltage source inverter (VSI) causes significant amount of energy loss. Multilevel inverters can reduce this harmonic content in the output ...

Mains impedance is a critical parameter to consider when diagnosing load generated power quality problems. High impedance can contribute to voltage sags, low voltage conditions, high frequency noise, transient impulses, and harmonic voltages. These problems can be created by the critical load, or by other loads powered from the same electrical source. This paper presents the concept of mains im...

This paper discusses the characteristics of powerfactor-correction (PFC) switching regulators of non-cascading structures in terms of efficiency, input current harmonic distortion, and load transient response. The discussion begins with simplified power flow diagrams of the non-cascading PFC switching regulators and describes their essential features for achieving power factor correction and ti...

The use of multilevel inverters is widespread in medium voltage applications due to their inherent voltage sharing among the devices. This work proposes three phase five level Flying Capacitor Multilevel Inverter (FCMLI) using various modulating techniques for induction motor load. These Pulse Width Modulating (PWM) techniques include Carrier Overlapping (CO) strategy, Variable Frequency (VF) s...

Conventional hysteresis current controllers have the disadvantage of a variable switching frequency. This paper proposes a fuzzy hysteresis band technique for the current control for shunt active power filter (SAPF). An active harmonic filter is used to eliminate current harmonics caused by nonlinear loads. The current control strategy utilizes using a selective Filter STF method to improve pow...