The weld pool is the core of the welding process where complex welding phenomena originate. Skilled welders acquire their process feedback primarily from the weld pool. Observation and measurement of the three-dimensional weld pool surface thus play a fundamental role in understanding and future control of complex welding processes. To this end, a laser line is projected onto the weld pool surf...

Tungsten inert gas (TIG) welding, also called as gas tungsten welding 1. (a) Schematic of TIG welding Process (b) Variety of tungsten electrodes. The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid. Tungsten inert gas welding, TIG is widely applied in manufacturing process for different The ...

Solid free-form fabrication (SFF) based on gas–tungsten arc welding (GTAW) is one of the few rapid prototyping techniques that has the capability to build three-dimensional metallic parts. For this application, a mild steel (AISI 1018) was used. The most important problem in this process was to find the optimal process parameters. The goal is to build complex three-dimensional parts by depositi...

The welding use correct process parameters will produce joint with optimum in mechanical properties. current is a very important parameter welding. Gas Tungsten Arc Welding carbon steel A53 Gr B uses variations can be an option to get the best quality joints. purpose of this research properties and microstructure by varying current. experimental method GTAW A 53 using single V butt 5G position,...

La presente investigación tuvo como objetivo determinar la influencia de los cambios morfológicos aleación aluminio AW 5086 en las propiedades mecánicas del conjunto soldado, al variar el régimen soldadura. Para ello se elaboraron cuatro (4) probetas Aleación Aluminio 5086-H116 soldadas con Bisel mediante proceso GTAW a través corridas donde combinaron diferentes amperajes y flujos. Posteriorme...

Pengelasan adalah proses penyambungan logam atau non-logam yang dilakukan dengan memanaskan material akan disambung hingga temperatur las, tanpa menggunakan tekanan dan pengisi. Salah satu teknik pengelasan SMAW (Shield Metal Arc Welding) GTAW (Gas Tungsen Welding). Dengan las tersebut kita dapat menyambung seperti: Aluminium, Tembaga, Carbon Steel, Stainless Steel. Penelitian ini untuk mengeta...

The dissimilar combination of 2.25Cr-1Mo (P22) and modified 9Cr-1Mo (P91) obtained using Gas Tungsten Arc Welding (GTAW) process employing the Ni-based superalloy filler ERNiCr-3 (IN82) ERNiCrMo-3 (IN625) have been investigated for microstructure evolution mechanical properties. butt weld joint was produced single bevel groove geometry. structural integrity welded measured in respect tensile st...

Austempered ductile iron (ADI) is a new engineering material type which continue receiving increased attention in research and industry. Extensive conducted so far has demonstrated that ADI excellent property combination such as high strength-weight ratio, ductility toughness, good fatigue strength, damping properties wear resistance. As result of to their exceptional mechanical mix, fabricatio...