In an Electric Submersible Pump (ESP) lifted oil field, the ESP of each oil well should be operated inside its operating window. The total power consumed by the ESPs in the oil field should be minimized. The speed of the ESPs and the production choke valve opening should be optimally chosen for maximizing the total oil produced from the oil field. At the same time, the capacity of the separator...

Hydraulic Pump sumps are designed to provide a swirl free flow to the pump. The degree of swirl is measured in physical model tests using a swirl meter and a quantity known as swirl angle is generally measured. The present paper presents a novel method to compute the bulk swirl angle using the local velocity field obtained from computational fluid dynamics data. The basis for the present method...

In this study, model tests and numerical simulations are conducted to study the bi-directional full-flow pump (BFFP). Firstly, head, efficiency shaft power of BFFP significantly higher in positive operating condition than negative condition. When unit operates direction, clearance reflux flow rate, uniformity velocity-weighted average angle impeller inlet, intensity pressure pulsation greater t...

OBJECTIVE To determine the effect of 3 differing transfusion techniques on survival of autologous canine RBCs. DESIGN Prospective, blinded study. SETTING University Teaching Hospital. ANIMALS Nine healthy dogs. INTERVENTIONS Three distinct preparations of RBCs, each representing ~1% of red cell mass, were generated for each dog by biotinylation of RBCs at varying biotin densities. Label...

The present study was undertaken to determine whether a biventricular bypass system operated in an independent variable rate (VR) mode can maintain the entire circulation. Two pusher-plate pumps which incorporated the Hall effect position sensors were used to bypass the right and left ventricles in 10 sheep under fibrillation. The flow distributions of the pump output to the carotid and renal a...

OBJECTIVE It is important for coronary active perfusion systems to avoid myocardial ischemia during off-pump coronary artery bypass grafting. We have developed a new concept for a perfusion system to pump blood based on changes in helium gas volume. This system uses a conventional intra-aortic balloon pump to activate the perfusion pump. Our study used basic and animal experiments to investigat...

Regenerative centrifugal pumps (RCP) are the subject of increased interest in industry as these pumps produce less noise, have low specific speed and are compact but capable of delivering high heads with stable performance characteristics. The regenerative flow pumps are essentially rotodynamic turbo machines capable of developing high pressure ratios within a single stage. This paper presents ...

Pulsations generated by personal sampling pumps modulate the airflow through the sampling trains, thereby varying sampling efficiencies, and possibly invalidating collection or monitoring. The purpose of this study was to characterize pulsations generated by personal sampling pumps relative to a nominal flow rate at the inlet of different respirable cyclones. Experiments were conducted using a ...

Tesla turbine and its applications in power generation and fluid flow were demonstrated by Nicholas Tesla in 1913. However, its real-world implementations were limited by the difficulty to maintain laminar flow between rotor disks, transient efficiencies during rotor acceleration, and the lack of other applications that fully utilize the continuous flow outputs. All of the aforementioned limits...