Powder diffraction ideally requires a very large number of crystallites in random orientations to be exposed to the X-ray beam. This is obtained in laboratory instruments by grinding the sample to a very fine grain size (< 10 µm) or by using fine-grained polycrystalline solids. When non-ideal powders are being characterized, one must find a means of increasing the number of crystallite orientat...

Two of the important parameters in grinding operation are surface roughness of the workpiece and the amount of consumed energy. These parameters are strongly affected by the condition of grinding wheel surface which is dependent on the dressing parameters. Predicting the roughness of the grinding wheel surface after dressing with known dressing parameters can improve the grinding process. Resea...

The grinding process consists of an abrasive contact between a moving workpiece and a wheel in rotation [1]. Because of the grinding power converted into heat at the interface, high temperatures can appear that can lead to thermal, mechanical or metallurgical consequences. Each of these effects has been fully related in literature by authors. Guo presents a good review of surface layers (dark, ...

The purpose of this study was to evaluate grinding efficiency in abutment teeth comprising both dentin and core composite resin in the axial plane. Grinding was performed over 5 runs at two loads (0.5 or 0.25 N) and two feed rates (1 or 2 mm/sec). The grinding surface was observed with a 3-D laser microscope. Tomographic images of the grinding surfaces captured perpendicular to the feed directi...

The purpose of our study is to investigate the heat distribution and the occurring temperatures during grinding. Therefore, we did both experimental and numerical investigations. In the first part, we present the integration of an infrared thermopile array in a steel workpiece. Experiments are done by acquiring data from the thermopile array during grinding of a groove in a workpiece made of st...

Semi-Autogenous Grinding mills can be optimized for maximum ore throughput or maximum grinding energy efficiency. In both cases, precise control of the mill weight is critical. Model predictive control provides an additional tool to improve the control of Semi-Autogenous Grinding mills and is often able to reduce process variability beyond the best performance that can be obtained with proporti...

The objective of this study was to determine the effect of different sugar beet pulp (SBP) pretreatments on biogas yield from anaerobic digestion. SBP was subjected to grinding, thermal-pressure processing, enzymatic hydrolysis, or combination of these pretreatments. It was observed that grinding of SBP to 2.5-mm particles resulted in the cumulative biogas productivity of 617.2 mL/g volatile so...

An effective, robust, and inexpensive grinding device for the grinding of herb samples like bark and roots was developed by rebuilding a commercially available coffee grinder. The grinder was constructed to be able to provide various particle sizes, to be easy to clean, and to have a minimum of dead volume. The recovery of the sample when grinding as little as 50 mg of crude Cinchona bark was a...

INTRODUCTION The manufacturing of complex shaped microstructures on microsystem parts in brittle materials provides a high geometrical accuracy [1]. This requirement can only be met by using microgrinding processes. There, metal bonded diamond grinding tools offer a remarkable potential due to their favorable wear behavior [2]. However, the dressing of complex microprofiles on these tools is no...

In this current era of competitive machinery productions, the industries are designed to place more emphasis on the product quality and reduction of cost whilst abiding by the pollution-preventing policy. In attempting to delve into the concerns, the industries are aware that the effectiveness of existing lubrication systems must be improved to achieve power-efficient and pollutionpreventing ma...