Ethyl levulinate (EL) can be produced from bio-based levulinic acid (LA) and ethanol. Experimental investigations were conducted to evaluate and compare the performances and exhaust emission levels of ethyl levulinate as an additive to conventional diesel fuel, with EL percentages of 5%, 10%, 15% (with 2% n-butanol), and 20% (with 5% n-butanol), in a horizontal single-cylinder four stroke diese...

oxides of nitrogen are the major emission from a diesel engine. it is due to heterogeneous diffusion combustion system with fuel-rich regions, which produce high local temperature around the periphery of the spray where high formation rate of no is promoted. various techniques are therefore employed to reduce the nox emission like egr, scr, etc. in this present work a rotating injector is a tec...

To carry out the investigation, a cylinder pressure model was developed based on the position of the crankshaft, engine load, engine speed, and fuel injection time. This model takes into account the maximum number of parameters involved. The accuracy of the model was verified by experimental results. The average error of the cylinder pressure, the average radical of the square of the error of t...

Vegetable oils are renewable in nature and can be directly used as fuels in diesel engines. However, their high viscosity and poor volatility lead to reduced thermal efficiency and increased hydrocarbon, carbon monoxide and smoke emissions. Transesterification is one of the methods by which viscosity could be drastically reduced and the fuel could be adopted for use in diesel engine. This Ester...

Biodiesel is often blended with regular U.S. No. 2 diesel. The blending level influences engine performance, emissions, and fuel cold‐flow properties. In this article, ultraviolet (UV) absorption spectroscopy is presented as a reliable and affordable technology for blend level detection based on the absorbance patterns of the aromatic compounds in the proposed spectrum. Blends of biodiesel from...

This paper shows the results of an investigation carried out to assess the application of different fuels produced by blending diesel fuel with methyl ester obtained from mixture of 75% (v/v) sunflower oil and 25% (v/v) used cooking oil on a Kubota agricultural indirect injection diesel engine, natural aspirated, and with a rated horsepower of 19.7 kW. Seven fuels, namely diesel fuel; 90:10, 80...

in this study, a numerical simulation using the cfd software, fluent, has been conducted to examine the effect of various shapes of the venturi component sections in order to find the optimum venturi specifications to increase the egr rate with minimum pressure loss at the part load operation range. the cfd results reveal that the venturi should be precisely optimized to introduce the required ...

Stringent CAFÉ regulations along with technological advances in materials, high-pressure fuel injection and complex turbo charging systems have rekindled interest in the area of Diesel engines for passenger vehicle applications. A modern Diesel engine is not only clean and quiet but also allows comparable drivability relative to gasoline engines with considerable improvements in fuel economy. H...