Adhesion of the reinforcement to the polymer matrix is essential for load transfer from the polymer matrix to the reinforcement material in fiber-reinforced composites. The reversible Diels–Alder reaction between a furan-functionalized epoxy-amine thermosetting matrix with a maleimide-functionalized glass fiber was used to impart remendability at the polymer–glass interface for potential applic...

To explore the feasibility of biodegradable fiber-reinforced 3D scaffolds with satisfactory mechanical properties for the repair of long-distance sciatic nerve defect in rabbits and effects of vascularized graft in early stage on the recovery of neurological function, Schwann cells and vascular endothelial cells were cocultured in the fiber-reinforced 3D scaffolds. Experiment group which used p...

Milling of fiber reinforced polymer composites is of great importance for integrated composites with other mating parts. Improper selection of cutting process parameters, excessive cutting forces and other machining conditions would result in rejection of components. Therefore, machining conditions are optimized to reduce the machining forces and damages. This work reports practical experiments...

Plastic worm wheel is widely used in the vehicle manufacturing field because it is favorable for weight lightening, vibration and noise reduction, as well as corrosion resistance. However, it is very difficult for general plastics to secure the mechanical properties that are required for vehicle gears. If the plastic resin is reinforced by glass fiber in the fabrication process of plastic worm ...

A statistical predictive model is developed that describes the compression properties of phenolic foam reinforced with glass fibers. An analysis of variance is applied to determine the behavior of composite phenolic foam. The material variables used in the study are fiber length, fiber weight fraction and weight percentage of blowing agent. The responses analyzed are density, compressive modulu...

A micromechanical model is constructed for the compressive strength of fiber-reinforced cementitious composites (FRCs). This model is based on the classical models of compressive failure of brittle solids in which sliding microcracks induce wing-crack growth under compression loads. The concept of increased microcrack sliding resistance and wing-crack growth retardation associated with fiber br...

Glass fiber reinforced polymer composites are one of the most widely used composite materials. The addition of Coal ash to polymer matrix dramatically increases the overall mechanical strength of the composite material as compared to the polymer composite. In view of this, a method is proposed for mixing coal ash powder (size 52-75 μm) into resin and Ash reinforced polymer composites are fabric...

An indirect J-integral technique for measuring the tension softening curve of non-yielding materials like concrete is presented and is applied to mortars reinforced with various short fiber types (steel and synthetic). The tension softening curve serves to characterize and measure material fracture resistance. The dependence of structural behavior on material fracture resistance is investigated...

Fiber-reinforced polymer (FRP) reinforcing bars have aTtracted considerable 0llellli0l1 for applications where corrosion of steel reinforcement is problemaric. Due 10 rhe generally low elastic modulus and poor bond clwracreristics of FRP as coil/pared 10 steel reinforcing bars, the use of FRP results in IGI:i?er crack widlhs under senJice loads. Fiber-reinforced concrete (FRe) is proposed for u...

During the last few years, natural fibers have received much more attention than ever before from the research community all over the world. These natural fibers offer a number of advantages over traditional synthetic fibers. The present study aims to determine the mechanical properties namely, Tensile strength (TS), Flexural strength (FS), and Impact strength (IS) of green coconut fiber reinfo...