Bulk metallic glasses (BMG’s) have long been materials of interest due to their high strength, high elastic limit, wear and corrosion resistance, and ease of thermoforming above the glass transition temperature [1]. The primary technical challenge of implementing BMG’s in engineering applications is their tendency to fail catastrophically via highly localized shear banding events. Though the el...

Effect of artificial ageing temperature on the mechanical properties of Al-6Si-0.5Mg alloy containing 0.5 – 4 wt% Cu was studied. The solution treated alloys containing different amounts of Cu were aged isochronally for 1 hour at temperatures up to 300C. The precipitation stages during ageing were monitored by hardness measurements. Tensile and impact properties were determined by standard test...

Manufacturers of rolled materials are always striving to reduce the costs associated with production—be they time, material, or waste. This is especially true with the manufacture of nextgeneration particle-reinforced materials, such as those used in high-value automotive components. Process variables such as temperahire, roller speed, and plate dimensions, among others, all affect strength, du...

The deflection and fracture of metal sandwich plates subjected to intense uniform impulsive pressure loads are studied for plates made of four steels representing a wide range of strength, strain hardening and ductility. Sandwich plates with both square honeycomb cores and folded plate cores are considered. The primary fracture modes of the sandwich plates are necking and subsequent tearing of ...

Molecular dynamics (MD) simulation was performed on an fcc solid platinum nanowire in this study. Infinite one-dimensional nanowires of circular and rectilinear cross sectional shapes were subjected to uniaxial tensile strain, and simulated at temperatures of 50K and 300K. The constitutive stress-strain response of the nanowire was investigated, the changes in crystal structure during axial def...

Grain refinement can make conventional metals several times stronger, but this comes at dramatic loss of ductility. Here we report a heterogeneous lamella structure in Ti produced by asymmetric rolling and partial recrystallization that can produce an unprecedented property combination: as strong as ultrafine-grained metal and at the same time as ductile as conventional coarse-grained metal. It...

The high-temperature stability and mechanical properties of refractory molybdenum alloys are highly desirable for a wide range of critical applications. However, a long-standing problem for these alloys is that they suffer from low ductility and limited formability. Here we report a nanostructuring strategy that achieves Mo alloys with yield strength over 800 MPa and tensile elongation as large...

Carbon nanotubes (CNTs) used to reinforce polymer matrix composites are functionalized to form covalent bonds with the polymer in order to enhance the CNT/polymer interfaces. These bonds destroy the perfect atomic structures of a CNT and degrade its mechanical properties. We use atomistic simulations to study the effect of hydrogenization on the mechanical properties of single-wall carbon nanot...

Precipitate size and number density are two key factors for tailoring the mechanical behavior of nanoscale precipitate-hardened alloys. However, during thermal aging, the precipitate size and number density change, leading to either poor strength or high strength but significantly reduced ductility. Here we demonstrate, by producing nanoscale co-precipitates in composition-optimized multicompon...