The calculation of heat consumption is based on the First Law and it gives quantitative information about the energy used in drying. However, it does not pay any attention to the quality of the energy used in drying. To take into account the quality of the energy, attention must be paid to the Second Law, too. Especially in those cases where the energy used in drying may be converted to mechani...

Turkish hazel (Corylus colurna) lumber with a nominal thickness of 5 cm from the Kastamonu region, Turkey, was dried through conventional kiln drying using two different programs, a nonprotective drying schedule and a protective drying schedule. The goal of the study was to obtain a kiln schedule that would maintain wood quality and also save drying time until a final moisture content of 8 ± 2%...

A domestic solar dryer with transparent external surfaces was designed, built and tested. Thin-layer drying models that describe the drying phenomena in a unified way, regardless of the controlling mechanism; have been used to estimate the drying period for several products. Temperature of the drying medium is one of the factors that affect the drying rate constant of the exponential model. Thi...

Research on rice drying and tempering has shown that high drying temperatures (up to 603C) and high moisture removal rates (up to 6 percentage points moisture content) can be used without reducing milling quality as long as sufficient tempering at a temperature above the glass transition temperature (Tg) is allowed between drying passes. Using drying air temperatures above the Tg of the rice si...

Nanostructured silica based xerogels and aerogels are prepared by sol-gel technology, using methyltrimethoxysilane as precursor. The influence of the drying method and conditions on the microstructure of the obtained materials is investigated, since the drying stage has a critical influence on their porosity. Two types of drying methods were used: atmospheric pressure drying (evaporative), to p...

Experiments were undertaken to study drying kinetics of different shaped moist food particulates during heat pump assisted fluidised bed drying. Three particular geometrical shapes of parallelepiped, cylindrical and spheres were selected from potatoes (aspect ratio = 1:1, 2:1, 3:1), cut beans (length: diameter = 1:1, 2:1, 3:1) and peas respectively. A batch fluidised bed dryer connected to a he...

This paper presents an experimental evaluation of the first commercial scale dry-sort-redry (DSRD) strategy for drying of 2x4 Pacific coast hemlock (PCH) lumber. The DSRD strategy is a methodology designed to reduce final moisture content variability in kiln dried lumber by complementing conventional drying with radio frequency vacuum (RFV) drying technology. The strategy’s objective is to avoi...

orange (citrus cinensis) is one of the most important among citrus fruits. the thin layer drying kinetics of orange (thompson variety) slice was here experimentally investigated in a convective dryer and through mathematical modeling and by use of thin layer drying models. drying characteristics of oranges were determined using heated ambient air at temperatures from 40 to 80 °c and velocities ...

One important problem in lumber drying is to maintain the lumber moisture content distribution within certain minimum and maximum values. Over-drying and under-drying are common causes for lower grade recovery and dimensional stability problems. It is known that both over-drying and underdrying can be reduced by sorting green lumber into different moisture content groups and sorting also offers...