This paper mainly researched on influence of vortex generator on lift coefficient and drag coefficient, when vortex generator is mounted on a flat plate. Vented cylinders were used as vortex generators which intensify vortex shedding in the wake of the vented cylinder as compared to base line circular cylinder which ensures more attached flow and increases lift force of the system. Firstly vent...

Sessile organisms often exhibit morphological changes in response to permanent exposure to mechanical stimulation (wind or water movements). The adaptive value of these morphological changes (hydrodynamic performance and consequences on fitness) has not been studied extensively, particularly for higher plants submitted to flow stress. The aim was to determine the adaptive value of morphological...

In this research numerical simulations are performed, using the multi-relaxation-time lattice Boltzmann method, in the range 3 ≤ β = w[d] ≤ 30 at Re = 100, 200 and 300, where β the blockage ratio, w is the equispaced distance between centers of cylinders, d is the diameter of the cylinder and Re is the Reynolds number, respectively. Special attention is paid to the effect of the equispaced dist...

The octopus arm requires special motor control schemes, because it consists almost entirely of muscles and lacks a rigid skeletal support. Here we present a 2D dynamic model of the octopus arm to explore possible strategies of movement control in this muscular hydrostat. The arm is modeled as a multi-segment structure, each segment containing longitudinal and transverse muscles and maintaining ...

Conceptual wing design analysis methods are combined with numerical optimization to find minimum drag wings subject to constraints on lift, weight, pitching moment, and stall speed. Minimum drag tip extensions and winglets are compared using nonlinear optimization. The minimum drag trapezoidal tip device depends on the ratio of the maneuver lift coefficient to the cruise lift coefficient, altho...

The aim of the present study was to analyze the hydrodynamic characteristics of a true model of a swimmer hand with the thumb in different positions using numerical simulation techniques. A three-dimensional domain was created to simulate the fluid flow around three models of a swimmer hand, with the thumb in different positions: thumb fully abducted, partially abducted, and adducted. These thr...

SUMMARY There is a need for a wave drag method that combines the speed of handbook methods with the accuracy of computational methods. Especially determining the onset of wave drag as well as the initial drag rise is important in initial design stages. Meta-models allow this by capturing the trends present in previously computed data, providing an accurate and fast representation. In this repor...

the flow characteristics around an elliptic cylinder with an axis ratio of ar=2 located near a flat plate were investigated experimentally. the elliptic cylinder was located on the inside and outside a turbulent boundary layer region whose thickness (δ) is 0.38b. the reynolds numbers based on the height of the cylinder cross-section were 15000 and 30000. measurements of mean velocity and turbul...

in this paper, lift and drag coefficients were numerically investigated using numeca software in a set of 4-digit naca airfoils. two metamodels based on the evolved group method of data handling (gmdh) type neural networks were then obtained for modeling both lift coefficient (cl) and drag coefficient (cd) with respect to the geometrical design parameters. after using such obtained polynomial n...

Significant progress has been made in the area of upper ocean responses and air-sea interactions during the passage of tropical cyclones (TC) since the first edition published in 1992. In terms of the upper ocean impacts on intensity, considerable attention has focused on the three-dimensional cold wake structure and the negative feedback due to ocean mixed layer cooling by shear-induced vertic...