We demonstrate a soliton fiber laser based on an anomalously dispersive erbium-doped fiber butt-coupled to a saturable absorber mirror for passive mode locking. The laser generates 180 fs pulses at a repetition rate of 491 MHz and exhibits a timing jitter as low as 20 fs over the frequency range 1 kHz-10 MHz.

Large-mode-area double clad fibers offer excellent efficiency and beam quality, high output power as well as lightweight, robust and reliable packaging. The addition of polarization maintaining property though use of well-know Panda-structure has further increased the interest in double clad fibers, especially in fibers doped with ytterbium (Yb). Many material processing, military and R&D appli...

In this paper we propose the application of H! control within optical networks. Specifically, we aim to suppress the cross-gain modulation effects within Erbium-doped fiber amplifiers owed to pilot tone disturbances used for optical monitoring. Based on the characteristics of these pilot tone disturbances, we design an H! controller to improve transient performance of optical channels within th...

Developing of new rare-earth (RE)-doped optical fibres for power amplifiers and lasers requires continuous improvements in the fibre spectroscopic properties (like shape and width of the gain curve, optical quantum efficiency, resistance to spectral hole burning and photodarkening,...). Silica glass as a host material for fibres has proved to be very attractive. However some potential applicati...

This thesis presents a comprehensive study of the role of the fiber replicator in electrooptical systems. In the all fiber optical diagnostic system for the National Ignition Facility‟s DANTE data acquisition system running at 1550nm, the 8× fiber replicator was used to increase the SNR (Signal to Noise Ratio) of single-shot, electrical pulse measurements. In the system, Mach-Zehnder modulators...

We demonstrate generation of sub-100 fs pulses at 1.5 µm in a mode-locked erbium-doped fiber laser using a 45°-tilted fiber grating element. The laser features a genuine all-fiber configuration. Based on the unique polarization properties of the 45°-tilted fiber grating, we managed to produce sub-100 fs laser pulses through proper dispersion management. To the best of our knowledge, this is the...

We demonstrate a 1.5-microm - wavelength fiber laser formed by placement of glass microsphere resonators along a fiber taper. The fiber taper serves the dual purpose of transporting optical pump power into the spheres and extracting the resulting laser emission. A highly doped erbium:ytterbium phosphate glass was used to form microsphere resonant cavities with large gain at 1.5microm . Laser th...

We present a totally fiber integrated chirped-pulse amplification system using air-core photonic bandgap fiber and a conventional erbium-doped fiber amplifier. ~40-ps input pulses, generated in a Mach-Zehnder modulator, were stretched and spectrally broadened in a dispersion-shifted fiber before being amplified and subsequently compressed in 10 m of anomalously-dispersive photonic bandgap fiber...

A microstructured polymer optical fiber doped with Rhodamine 6G dye was fabricated and demonstrated as an optical amplifier and a fiber laser. As an amplifier, the fiber achieved a gain in excess of 30 dB. As a pulsed fiber laser, the fiber exhibited a threshold of 20 microJ, a slope efficiency of 18%, and a lifetime as high as 130,000 shots at 10 Hz. The maximum output energy was 16 microJ. Th...

A fiber made by Furnace CVD was codoped with Erbium and Magnesium using a Flash Vaporization System for the first time. The fiber core is spontaneously formed as a Transparent Glass Ceramic (TGC). Due to the small nanoparticle size (<50 nm) and high volumetric density (10~10 m), the optical loss due to scattering is as low as < 0,6 dB/m. Erbium ions are highly concentrated within phase-separate...