نتایج جستجو برای: dc dc resonant converter

تعداد نتایج: 100712  

2015
V. Durga Bhavani

In this paper an asymmetrical duty cycle control strategy was proposed to the TPTL dc/dc converter. The modified converter remains all the advantages of original control strategy; meanwhile, soft-switching can be achieved using the energy stored in output filter inductance and leakage inductances of transformers (or resonant inductances).Three-phase three-level (TPTL) dc/dc converter has the ad...

2007
Robert C. N. Pilawa-Podgurski David J. Perreault Arthur C. Smith

This thesis presents a resonant boost topology suitable for very high frequency (VHF, 30300 MHz) dc-dc power conversion. The proposed design is a fixed frequency, fixed duty ratio resonant converter featuring low device stress, high efficiency over a wide load range, and excellent transient performance. A 110 MHz, 23 W experimental converter has been built and evaluated. The input voltage range...

This paper presents the analysin ,design and implementation of a high voltage ratio topology of DC-DC converter. The DC-DC converter has high voltage ratio with reduced input current, output voltage and output current ripple, and also reduces the voltage and current rating of power electronics components and compared with conventional boost converter. The voltage stress on the switches are  red...

2017
Subramani Saravanan Neelakandan Ramesh Babu

A non-isolated high voltage gain DC-DC converter has been presented in this paper. The boost, SEPIC and modified SEPIC converters were nalyzed and their performance was compared with the proposed converter. The proposed converter has been designed for the input voltage of 5 V and an output voltage of 150 V with 100 W output power. The efficiency of the converter obtained was 92.5%, which is hig...

2013
Neetu Sharma Rahul Dubey

The main objective of this paper is to compare the performance between fuzzy controller and proportional integral controller in improving the performance of the DC-DC Buck Converter. The evaluation of the output has been carried out and compared by software simulation using MATLAB. This paper also evaluates the stability of the system with fuzzy controller and PI controller and concludes that t...

2009
Tihomir Sashev Brusev Marin Hristov Hristov

This paper includes investigations of power losses in monolithic buck dc-dc converter designed with Cadence on CMOS 0.35 μm process. Input voltage of the designed circuit is equal to 3.6 V and output voltage is regulated to 1.2 V. Evaluated and estimated are power dissipations in the MOS transistor, filter inductor and filter capacitor of the buck converter. Investigated and compared are losses...

2012
Srinivas Reddy Gurrala

This paper presents the implementation of a bidirectional dc-dc converter to protect a battery from overcharging and undercharging. The proposed converter circuit provides low voltage stresses across the switches, higher step-up and step-down voltage gains and efficiency is also high when compared to conventional boost/buck converter. The proposed control circuit controls the charging and disch...

2013
Hye-Im Jeong Chan-Soo Lee Nam-Soo Kim

Copyright 2013 KIEEME. All rights reserved. This is an open-access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted noncommercial use, distribution, and reproduction in any medium, provided the original work is properly cited. pISSN: 1229-7607 eISSN: 2092-7592 DOI: http://dx...

2016
Rui Li John E. Fletcher

The AC voltage control of a DC/DC converter based on the modular multilevel converter (MMC) is considered under normal operation and during a local DC fault. By actively setting the AC voltage according to the two DC voltages of the DC/DC converter, the modulation index can be near unity, and the DC voltage is effectively utilized to output higher AC voltage. This significantly decreases submod...

Multiple output DC-DC converters are widely used in many applications such as aerospace, industrial and medical equipments. The purpose of this paper is to present an intelligent control system for the multiple output DC-DC converters. In order to perform this purpose, a double ended forward DC-DC converter with three output voltages (+5 V/ 50W, +15 V/ 45W and -15 V/ 15W) is considered and anal...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید