A total of 84 sows (PIC Line 1050) were blocked according to day of farrowing and parity and allotted in a 2 x 2 factorial arrangement of treatments with lactation feed intake (ad libitum vs. restricted) and creep feeding (no vs. yes) as factors. Sows fed for ad libitum intake (ad libitum-fed) were allowed free access to a common lactation diet (3,503 kcal of ME/kg, 0.97% standardized ileal dig...

a r t i c l e i n f o A powerful and robust numerical homogenization method based on fast Fourier transform (FFT) is formulated to identify the viscoelastic behavior of calcium silicate hydrates (C-S-H) in hardened cement paste from its heterogeneous composition. The identification is contingent upon the linearity of the creep law. To characterize cement paste microstructure, the model develope...

R f search has produced two major procedures for assessing creep and shrinkage; the ACI 209 method' and the CE$-FJP method.' Laboratory research into concrete creep and shrinkage has been conducted for decades, and excellent analytical procedures for evaluating structures for creep and shrinkage have been presented in the literature.'-5 Creep and shrinkage are factors in the design of a variety...

Changes in membrane current in response to an elevation of [Na]i were studied in enzymatically dispersed frog atrial cells. Na loading by either intracellular dialysis or exposure to the Na ionophore monensin produces changes in membrane current that resemble the "creep currents" originally observed in cardiac Purkinje fibers during exposure to low-K solutions. Na loading induces a transient ou...

The effect of chemical treatment at fiber–plastic interface and fiber loading level on creep property of bamboo fiber high-density polyethylene (BF/HDPE) composites was investigated. For single modifier systems, the use of maleic anhydride grafted polyethylene (PE-g-MA) as a coupling agent helped reduce the creep and achieved the optimum effect at the 5.7% loading level. The addition of either ...

When an anisotropic material is subject to creep conditions and a complex state of stress, an anisotropic creep damage behavior is observed. Previous research has focused on the anisotropic creep damage behavior of isotropic materials but few constitutive models have been developed for anisotropic creeping solids. This paper describes the development of a new anisotropic tertiary creep damage c...

[1] The characterization of time-dependent brittle creep, promoted by chemically active pore fluids, is fundamental to our understanding of the long-term evolution and dynamics of the Earth’s crust. Here we report results from a study of the influence of temperature on both short-term strength and time-dependent brittle creep in three sandstones under triaxial stress conditions. We show that an...

The creep aging behaviors of retrogressed Al-Zn-Mg-Cu alloy were studied by uniaxial tensile creep tests at 140 ◦C. The effects of creep aging time and applied stress on microstructures and properties of the studied alloy were investigated by using transmission electron microscope (TEM), hardness, and corrosion resistance tests. Results show that the effects of the creep aging process on micros...

It has been suggested that the endurance of cemented femoral reconstructions in total hip arthroplasty is affected by the creep of acrylic cement, but it is not known to what extent cement creeps under loading conditions in vivo, or how this affects load transfer. We have simulated the long-term creep properties of acrylic cement in finite-element models of femoral stem constructs and analysed ...

S U M M A R Y We present a model of localized, aseismic fault creep during the full interseismic period, including both transient and steady fault creep, in response to a sequence of imposed coseismic slip events and tectonic loading. We consider the behaviour of models with linear viscous, non-linear viscous, rate-dependent friction, and rateand state-dependent friction fault rheologies. Both ...