Diatomite-supported/unsupported magnetite nanoparticles were prepared by co-precipitation and hydrosol methods, and characterized by X-ray diffraction, nitrogen adsorption, elemental analysis, differential scanning calorimetry, transmission electron microscopy and X-ray photoelectron spectroscopy. The average sizes of the unsupported and supported magnetite nanoparticles are around 25 and 15 nm...

abstract background: heavy metals in industrial wastewater especially chromium (vi) are considered as the main environmental pollutants. methods: electrochemical cell made of plexiglass with a volume of 1.95 lit was used. iron and graphite electrodes, electricity conductor, each with dimensions of 0.1×3×10 cm (width×length×height) were designed and built. tests were carried out in various condi...

Water pollution caused by the highly toxic metal hexavalent chromium (Cr(VI)) creates significant human health and ecological risks. In this study, a novel adsorbent was used to treat Cr(VI)-containing wastewater; the adsorbent was prepared using red mud (RM) generated from the alumina production industry and the rare earth element lanthanum. This study explored adsorption performance, kinetics...

The adsorption capacity of hebba clay and activated carbon towards (Fe 3+ , Cu 2+ , Zn 2+ , Pb 2+ , Cr 3+ , Cd 2+ ) metal ions was studied. The adsorption capacity was investigated by batch experiment. The effect of weight of hebba was studied and the results showed that the removal percentages increased as the weight of sorbent increased. The effect of contact time was also studied and the res...

A method for grafting ethylenediamine to a magnetic graphene oxide composite (EDA-GO@Fe3O4) was developed for Cr(VI) decontamination. The physicochemical properties of EDA-GO@Fe3O4 were characterized using HRTEM, EDS, FT-IR, TG-DSC, and XPS. The effects of pH, sorbent dose, foreign anions, time, Cr(VI) concentration, and temperature on decontamination process were studied. The solution pH can l...

In order to characterize the ion-exclusion and cation-exchange properties of an unmodified silica-gel column, the retention behaviors of Cr(VI) and Cr(III) ions were investigated using a Develosil 30-5 (150 x 4.6 mm i.d.) in the acidic region. Cr(VI) was separated from other anions by an ion-exclusion and ion-adsorption mechanism, and Cr(III) was separated from other cations with a cation-excha...

To develop Bi2S3-based heterojunction for efficient solar light induced photoreduction of Cr(VI), flower-like Bi2S3–In2S3 composites consisted nanorods were prepared via a microwave-assisted hydrothermal route. In contrast with pure Bi2S3, exhibited the enhanced activity while decreased adsorption capacity Cr(VI) removal. The best removal efficiency 70 mg L?1 solution (99.86%) was achieved by o...

A microporous bisphenol A diglycidyl ether (DGEBA) epoxified-polyethersulfone (PES) blend membrane (EPES membrane) was prepared through dry-wet phase inversion. This study attempts to correlate the changes in membrane physical and chemical properties when the EPES membranes were exposed to different durations of dry-phase inversion, towards the separation efficiency of carcinogen chromium (VI)....

Abstract A face-centred central composite experimental design scheme was used to find conditions this would result in producing magnetic bleached teawaste (MBTW) adsorbent material have the optimum hexavalent chromium (Cr(VI)) removal capacity. The effect of treatment conditions, namely temperature (200 °C, 350 500 °C), duration heat (2 h, 3 4 h), concentration iron chloride (0.02 g/g, 0.055 0....