Co-Cr-Mo alloy samples, fabricated using Laser Engineered Net Shaping – a laser-based additive manufacturing technology, have been subjected to heat treatment to study its influence on microstructure, wear, and corrosion properties. Following L9 Orthogonal array of Taguchi method, the samples were solutionized at 1200°C for 30, 45, and 60min followed by water quenching. Aging treatment was done...

The corrosion resistance of nanopowders of borides and carbides of metals of IV-VIB groups, as well as of silicon carbide, was studied in the standard nickeling electrolytes. As objects of study, nanopowders with the content of the main phase 91.8-97.6% and with the average particle size 32-78 nm were used. Their corrosion resistance was evaluated depending on the acidity of the electrolyte, te...

Service experience from 27 seawater reverse osmosis (SWRO) plants confirms that there is an evident risk of corrosion if wrong steel grade is used for the high pressure piping. Neither 316L nor 317L possesses sufficient corrosion resistance. Not even highly alloyed grades like 2205 and 904L show reliable service performance. However, no corrosion has been reported for 254 SMO, which has been us...

The new superaustenitic stainless steel UNS S32654 (Avesta Sheffield 654 SMO) is proposed for condenser tubes in desalination and power plants. A number of tests illustrating its corrosion resistance in a variety of chloride containing environments are being reviewed in terms of pitting, crevice corrosion and stress corrosion cracking. Relevant mechanical and physical properties are described. ...

Titanium and its alloys are widely used in aircraft, rocket production, shipbuilding, machine industry, chemical and food industry, medicine due to their high specific strength, good corrosion resistance and biological passivity. However, titanium has properties which limit its application as construction material. Particularly, tendency to surface adhesion and galling at friction results in it...

In this study, the bio-electrochemical response of the Ti–Zr–Si thin film metallic glasses (TFMGs) in simulated body fluid with different contents of titanium is measured via potentiostat. According to the results of bio-corrosion potential and current, as well as the polarization resistance, it is concluded that the Ti66Zr25Si9 TFMGs possess the highest bio-electrochemical resistance. With inc...

in this study, mixed metal oxides al2o3/mgo/tio2 coatings with al/mg/ti ratio of 5:1:3 and 2.5:3:4 were coated on aluminum by sol-gel method. the surface morphology, phase analysis, thermal behavior and the corrosion behavior of the al2o3/mgo/tio2 coatings were characterized by (sem), (xrd), (tg-dta) and potentiodynamic polarization test in 3.5 wt.% nacl solution. the results demonstrated that ...

A new technique was accepted to fill the porosity of Al coating applied by arc thermal spray process to enhance corrosion resistance performance in artificial ocean water. The porosity is the inherent property of arc thermal spray coating process. In this study, applied coating was treated with different concentrations of ammonium phosphate mono basic (NH4H2PO4: AP) solution thereafter dried at...

Stainless steel has been frequently used for temporary implants but its use as permanent implants is restricted due to its low pitting corrosion resistance. Nitrogen additions to these steels improve both mechanical properties and corrosion resistance, particularly the pitting and crevice corrosion resistance. Many reports concerning allergic reactions caused by nickel led to the development of...

A series of 18 Ni (300 grade) maraging steels of overall commercial purity but containing also deliberate impurity additions of sulphur, phosphorus, carbon, chromium and silicon + manganese has been studied. The fracture toughness and stress-corrosion resistance (determined using planestrain fatigue-precracked specimens tested in 3. 5% sodium chloride solution) of these steels have been compare...