A cascade of resistively loaded etched rings in waveguide is proposed to act as the load in a balanced FMCW Reflected Power Canceller topology using a slotted waveguide array antenna. A synthesis technique using derived equivalent circuit models, is presented and tested.

Waveguide mirrors (WGMs) possess nano-structured surfaces which can potentially provide a significant reduction in thermal noise over conventional dielectric mirrors. To avoid introducing additional phase noise from the motion of the mirror transverse to the reflected light, however, they must possess a mechanism to suppress the phase effects associated with the incident light translating acros...

A bow-tie slot antenna with tapered connection to a 50Ω coplanar waveguide (CPW) feed line is introduced and its dimensional parameters have been studied for wideband operations in the X-band. A set of two element bow-tie slot antennas fed by one CPW is also introduced for wider bandwidth and improved gain. The configuration of one CPW feeding two elements of this antenna is simulated and it ac...

This paper presents a rectifying antenna (rectenna) for the harvesting of the microwave energy associated to UHF (UltraHigh Frequency) Radio Frequency IDentification (RFID) systems. The proposed device uses a capacitively loaded T-shaped monopole with a coplanar waveguide feeding line as receiving antenna and a five-stage voltage multiplier as rectifier. Experimental results demonstrating an RF...

In this paper, the design and analysis of a compact size coplanar waveguide (CPW)-fed antenna for ultrawideband (UWB) applications is presented. The antenna has a compact size of 20×20× 1.5 mm and provides a good impedance matching over the entire bandwidth of 3.2–14.3 GHz. The characteristics parameters, i.e. return loss, VSWR and radiation pattern, are analyzed using HFSS 11.0 software. Keywo...

We show that chemical fixation enables top-down micro-machining of large periodic 3D arrays of protein-encapsulated magnetic nanoparticles (NPs) without loss of order. We machined 3D micro-cubes containing a superlattice of NPs by means of focused ion beam etching, integrated an individual micro-cube to a thin-film coplanar waveguide and measured the resonant microwave response. Our work repres...

A package characterization technique using coplanar waveguide (CPW) probes and line–reflect–match (LRM) calibrations for surface-mountable packages is presented. CPWto-package adapters (CPA) are fabricated on alumina substrates to mount and measure the high-frequency response of plastic packages. Offset CPA standards in conjunction with an LRM calibration are used to de-embed the response of th...

An accurate model for lossy non-unifoim transmission lines is presented. The tcchnique provides a coplanar waveguide (CPW) taper model, which has been used to accurately dc-embed measurcments of passive CPW components in line gcometriea diffcring from the nominal 50 Q geometry of thc calibration. Thc modcl accounts for both dielectric and conductor losses, and is shown to be in excellent agreem...

A configuration for a miniaturized band-pass filter on a coplanar waveguide (CPW) is proposed in this communication. Parametric studies conducted for various geometrical parameters suggest that the frequency response of the filter is strongly related to that of the spiral slots. A a series gap on the center conductor of the CPW changes the overall response of the device. For validation of these...

Silicon photonics is merging as a unified platform for driving photonic based telecommunications and for local photonic based interconnect but it suffers from large footprint as compared with the nanoelectronics. Plasmonics is an attractive alternative for nanophotonics. In this work, two CMOS compatible plasmonic waveguide platforms are compared. One is the horizontal metalinsulator-Si-insulat...