In this study, physical vapor deposition (PVD) Ti-Cr-N coatings were deposited at two different temperatures 100 and 400ºC on hardened and tempered tool steel substrates. The influence of the applied deposition temperature on the physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and Young’s modulus were evaluated. Phase compositions were st...

Ni-W coatings, compared to pure nanocrystalline Ni, exhibit higher hardness and wear resistance. In some cases, these coatings are considered as environmental friendly alternatives for hard chromium coating. Till now, most of Ni-W coatings have been produced by direct current electrodeposition from alkaline baths. In this study square pulse current was used for deposition of Ni-W precipitates f...

The conventional method for synthesizing waterborne polymer colloids is emulsion polymerization using surfactants. An emerging method is the use of secondary dispersions (SD) of polymers in water, which avoids the addition of any surfactant. Although there are numerous studies of the water barrier properties (sorption, diffusion, and permeability) of waterborne emulsion (Em) polymer coatings, t...

Cochlear and deep brain implants are prominent examples for neuronal prostheses with clinical relevance. Current research focuses on the improvement of the long-term functionality and the size reduction of neural interface electrodes. A promising approach is the application of carbon nanotubes (CNTs), either as pure electrodes but especially as coating material for electrodes. The interaction o...

We demonstrate a strategy of incorporation and opening of light-sensitive containers in anticorrosion coatings for construction of very efficient light responsive protective coatings.

in this study, the corrosion resistance of a bituminous coating reinforced with different ratios ofnanoclay pigment was studied. to make nanocomposite coatings, 2, 3, and 4 wt.% of clay (cloisitena+) were incorporated into water emulsified bitumen. the coatings were applied to steel 37. opticalmicroscopy and x-ray diffraction (xrd) were used to characterize the nanocomposite structure. inorder ...

Four point bend tests were conducted on two previously characterized particulate filled thermoplastic and thermoset polymeric coatings, the acoustic emission (AE) method being utilized to monitor the damage progress during the tests. Different damage mechanisms operating in the polymeric coatings can be recognized by the different amplitude range of the AE signals emitted. AE can be used to ass...

Introduction: Surface coatings on rocks are common if not ubiquitous on Earth, and now they have been observed and documented on the surface of Mars [1-3]. They occur in a variety of environments, and vary in composition, thickness, and physical properties. Surface coatings are important because they record conditions of alteration mostly owing to exposure to the planet’s atmosphere. Coatings a...

Hydrogen free diamond-like carbon (DLC) coatings have been the subject of investigation all around the world for the last 30 years. DLC, due to its unique properties such as: chemical inertness, high mechanical hardness, high electrical resistivity combined with a characteristics of a wide band semiconductor, is a very promising material for biomedical, mechanical and electrical applications. O...