Pulses of oil were added to completely mixed reactors fed with dairy cow manure and food waste, after achieving a stable performance at an organic loading rate of 4.6+/-0.1gCOD/(l(reactor) day), an oily waste effluent from a canned fish processing industry was fed in the form of pulses. The oil concentration rose up to 9, 12, 15 and 18gCOD(oil)/l(reactor,) after the pulse feeding in the reactor...

The chemical composition, hydrolysis products, and kinetics during liquid hot water pretreatment of sweet sorghum bagasse (SSB) and eucalyptus wood chips (EWC) were investigated. Under optimal conditions, a total xylose recovery of 79.6% and 55.6% for SSB and of 74.9% and 84.4% for EWC was achieved after pretreatments in a step-change flow rate reactor (184 °C, 20 ml/min, 8 min, and 10 ml/min, ...

This paper presents the simulation of auto-thermal ammonia synthesis reactor. Our target here is to estimate the optimal reactor length which will give the maximum profit from the ammonia reactor. There are many literatures which are interested in ammonia simulation in the past but all need some corrections due to either uncorrected model used or uncorrected algorithm. We used here the ODE45 so...

The future International Thermonuclear Experimental Reactor (ITER) is a complex installation that will require permanent monitoring and frequent maintenance operations. The high-gamma dose rates, the high neutron fluence and other radiological hazards call for the use of remotehandled equipment. The management of heavy umbilicals connecting the control systems with the remote tools is therefore...

This study examined the effectiveness of an open channel, low pressure (LP), ultraviolet (UV) reactor for water treatment in a low head (LH) recirculating aquaculture system (RAS). Currently available UV reactors use high pressure pumps and submerged bulbs. The reactor in this study makes use of the head gained by the water recirculation of the LH-RAS without the need for additional pumps, whil...

Several microfluidic reactors were designed and applied to the synthesis of colloidal semiconductor nanocrystals (NCs). Initially, a simple single-phase capillary reactor was used for the synthesis of CdSe NCs. Precursors were delivered into a section of the capillary maintained at high temperature where they decomposed and reacted to form NCs. Monodisperse, bright CdSe NC samples were prepared...

.................................................................................................................................................... 1 I – INTRODUCTION .................................................................................................................................... 2 II – BACKGROUND .................................................................................

The activated sludge process is one of the most important parts of conventional wastewater treatment plants. Wastewater is treated biologically in activated sludge basins. Activated sludge can remove soluble contaminants, primarily organics compounds and nitrogen, from the wastewater stream. The activated sludge is a mixture of microorganisms, inorganic and organic compounds aggregated to flocs...

This paper considers the modeling and control of a tubular fixed bed reactor with recycle stream for dimethyl ether (DME) production. For simulation purposes, a pseudo homogeneous model has been developed. By reactor simulation under steady state condition, effects of parameters such as feed rate, pressure and shell temperature are investigated. Using the steady state model, an optimizer that m...

This study proposes an effective method to inspect inaccessible nuclear power reactor head nozzles using interface waves that propagate along the shrink fit boundary of a reactor head. The reactor head is relatively thick, which makes it difficult to inspect from the outside by conventional ultrasonic testing. However, interface waves can propagate a long distance from a fixed transducer positi...