Different techniques have been introduced for the removal of ceramic brackets. Since the early 1990s, lasers have been used experimentally for debonding ceramic brackets. The goal of this study is to give a comprehensive literature review on laser-aided ceramic bracket debonding. PubMed and Google Scholar databases were used to identify dental articles with the following combination of key word...

Dental materials need to be thoroughly examined in order to assess their long-term therapeutical value. Chemical degradation of dental ceramic material enhances its roughness, leading to the wear of the opposing natural tooth or restorative material, greater plaque attachment to ceramics, weakening of the ceramic structure causing the critical ion exchange at the surface and enhancing the sensi...

The objective of the present study was to assess the influence of the roughness of a loaded surface on crack formation in a mica-based glass-ceramic bonded to a resin composite base. Five different surface roughnesses were created on glass-ceramic discs by serial wet-grinding with silicone carbide abrasives. The thicknesses of the ceramic discs were 1.50 +/- 0.01 mm. Resin composite discs were ...

Implant restoration in the esthetic zone can present many challenges for the clinician. Patient and clinician demands for implant restorations with better esthetics have led to the introduction of ceramic abutments. With this introduction, questions have arisen regarding the properties of ceramic materials and their use in the fabrication of implant abutments. This issue of Report 011 Prosthodo...

This case report describes a patient with discolored and fractured composite resin restorations on the anterior teeth in whom substitution was indicated. After wax-up and mock-up, the composite was removed and replaced with minimally invasive ceramic laminates. An established and predictable protocol was performed using resin cement. Minimally invasive ceramic restorations are increasingly bein...

An important technique used for the suppression of surface flashover on high voltage DC ceramic insulators as well as for RF windows is that of providing some surface conduction to bleed off accumulated surface charge. We have used metal ion implantation to modify the surface of high voltage ceramic vacuum insulators to provide a uniform surface resistivity of approximately 5 x 1010 Ω/square. A...

The Rajendran-Grove (RG) ceramic damage model is a three-dimensional internal variable based constitutive model for ceramic materials, with the considerations of micro-crack extension and void collapse. In the present paper, the RG ceramic model is implemented into the newly developed computational framework based on the Meshless Local Petrov-Galerkin (MLPG) method, for solving high-speed impac...

In this paper the MBS (Magnesium borosilicate) based glass-ceramic have been prepared and characterised to find its suitability in Low temperature cofired ceramics (LTCC) technology. The glass-ceramics were prepared by using conventional solid state route. The experimental study was conducted on the MBS glass-ceramic containing MAS (Magnesium Alumino-Silicate) based glass-ceramic as an additive...

The accurate characterization of the temperature-dependent permittivity of aluminum nitride (AlN) ceramic is quite critical to the application of wireless passive sensors for harsh environments. Since the change of the temperature-dependent permittivity will vary the ceramic-based capacitance, which can be converted into the change of the resonant frequency, an LC resonator, based on AlN cerami...

The aim of this investigation was to evaluate the metal-ceramic bonding of Au-1.6 wt% Ti alloy. Therefore, the coefficient of thermal expansion, modulus of elasticity, ceramic bonding strength, and hardness of Au-1.6 wt% Ti alloy were measured. The metal-ceramic interface was observed by EPMA to investigate its bonding mechanism. The Au-1.6 wt% Ti alloy showed a coefficient of thermal expansion...