نتایج جستجو برای: catalyst bed

تعداد نتایج: 92393  

2017
Lalit S. Gangurde Guido S. J. Sturm Tushar J. Devadiga Andrzej I. Stankiewicz Georgios D. Stefanidis

The complexity and challenges in noncontact temperature measurements inside microwave-heated catalytic reactors are presented in this paper. A custom-designed microwave cavity has been used to focus the microwave field on the catalyst and enable monitoring of the temperature field in 2D. A methodology to study the temperature distribution in the catalytic bed by using a thermal camera in combin...

Journal: :Aerospace 2023

Ammonia dinitramide (ADN)-based liquid monopropellants are considered to be environmentally friendly alternatives the toxic and carcinogenic hydrazine-based propellants. Hence, Space Solutions Co., Ltd. is developing a 1N ADN-based monopropellant thruster by conducting combustion performance in different types of reactors. Various parameters, such as preheating temperature size thermal catalyst...

The high silica Mn-substituted MFI metallosilicate catalyst with Si/Al molar ratio of 220 and Si/Mn molar ratio of 50 was successfully synthesized by hydrothermal method. The catalyst sample was appropriately characterized by XRD, FE-SEM, EDX and BET techniques. The Mn-substituted MFI metallosilicate has not been reported as the potential catalyst for the methanol to propylene (MTP) reaction. T...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه رازی - دانشکده علوم 1390

abstract in first part of this project, the use of a new and biguanid-like catalyst supported on silica as a recyclable catalyst provides a new route for the synthesis of a variety of arylalkylidene rhodanine derivatives through knoevenagle reaction in at present of solvent at room temperature. rhodanine derivatives and especially arylalkylidene rhodanines have proven to be attractive compound...

An alumina-supported nickel catalyst was prepared by impregnation of Ni2+ solution onto mesoporous alumina under microwave irradiation (denoted as M-Ni/Al2O3). For comparison, a catalyst with the same nickel content was prepared by conventional impregnation method (denoted as UM-Ni/Al2O3). Both M-Ni/Al2O3 and UM-Ni/Al2O3 catalysts were applied to the syngas (H2 + CO) production by methane oxy-s...

Journal: :iranian journal of catalysis 2015
ali afshar ebrahimi sara tarighi

the catalytic cracking of a fuel oil over fluid catalytic cracking (fcc) catalyst has been investigated applying different additives. catalyst mixtures consisting of a equilibrium fcc catalyst (e-cat) blended with zsm-5, mcm-41 and mordenite additives were examined at the additive levels of 25 wt.%. the catalytic performance of the matrix was studied in a fixed bed micro-activity test unit (mat...

2010

Ethylbenzene is primarily produced by the alkylation of benzene with ethylene in liquid-phase slurry reactors promoted with aluminum chloride catalysts or by vapor-phase reaction of benzene with dilute ethylene-containing feedstock with a boron trifluoride catalyst supported on alumina (Cannella 2007; Clayton and Clayton 1981; HSDB 2009; Welch et al. 2005; Ransley 1984). Newer versions of the m...

Journal: :Chemistry and Technology of Fuels and Oils 2021

The maleic anhydride market in Russia is analyzed. An assessment made of the existing production technologies and optimal technology proposed. scheme with a fixed catalyst bed selected. Possible problems arising at all construction stages are identified ways solving them

Journal: Gas Processing 2016

In the first part of two section paper, a mathematical model of the fluidized bed reactor in the presence of in-situ water adsorbent for methanol synthesis is assessed. The bubbling two-phase regime is applied to model the fluidization concept. The binary adsorbent and catalyst particles system can be separated from each other based on their density difference. The heavy catalyst particles tend...

2012
Harald Walter Reinhard Rauch

The present study describes the application of Fischer Tropsch biowaxes as a feedstock in a pilot-scale hydroprocessing unit at operating conditions very similar to industrial size hydrotreating plants of traditional refineries. The project focus on a future coprocessing of biowax/gasoil blends due to produce bio-products derived from lignocellulosic biomass: crack gases, naphtha, kerosene, die...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید