In the present study, mechanical properties and low cycle fatigue behavior of a solid-solutionized AA6061 aluminum alloy produced by equal channel angular pressing (ECAP) process were investigated. The grain refinement after two passes of ECAP significantly increased the yield stress and ultimate tensile stress and decreased the ductility of the alloy. However, the improvement of low cycle fati...

In the present work microstructural evolution of A356 Aluminum alloy using an inclined cooling plate casting process for thixoforming feedstock production is investigated. The resultant microstructure was evaluated and compared with those of the same alloy produced by the conventional casting process, i.e. directly cast in the same mold without using an inclined cooling plate. It was found that...

Triazinedithiol polymeric nanofilm was prepared on a pure aluminum surface by electrochemical polymerization of AF17N. The mechanism of the process was proposed and electrochemical polymerization parameters were investigated. The triazinedithiol polymeric nanofilm had notable lubricity, high dielectric property and superhydrophobic property due to the allyl and fluoro alkyl groups in the AF17N ...

This study is a follow-up of previous work by the authors on the effects of processing variables on the deformation and fracture of 2024-T4 aluminum. In the previous work, four variables were incorporated into a Design of Experiments methodology: solution temperature, solution time, cooling rate and natural aging time. Solution time and cooling rate were found to be the most significant factors...

Rene88 samples were investigated using atom probe tomography and x-ray diffraction using a monochromated synchrotron beam with different energy values to determine the preferred site occupancy of various alloying elements within the ordered γ’ precipitates. Samples were solutionized and cooled at 24 degree C/min with subsequent aging at 760 degrees C. The synchrotron-based x-ray diffraction res...

By undertakig an aging experiment on 2219 aluminum alloy under different external field and by the method of hardness test, a comparative study on the kinetics of aging generated under different external fields was conducted. Furthermore, the time-temperature-transformation curves (TTT curve) were obtained, and the microstructure and mechanical property of the alloy under the effect of differen...

The effect of the vanadium addition on the microstructure, the precipitation behavior, and the mechanical properties of the Al-5.0Cu-0.4Mn alloy has been studied. The as-cast Al-5.0Cu-0.4Mn alloy was produced by squeeze casting and the heat treatment was carried out following the standard T6 treatment. It is shown that, with the addition of V, grain refinement of aluminum occurred. During heat ...

In this study, Ti-5Al-2.5Fe alloy was prepared by powder metallurgy. The elemental titanium, aluminum, and iron powders were mechanically alloyed for 10 h in a vacuum atmosphere. A stainless steel jar and stainless steel balls were used for mechanical alloying. The alloyed powders were then sintered by vacuum hot pressing at 950 °C for a soaking time of 30 minutes. Pure titanium was also sinter...

Recently, to further improve the performance of aluminum foam, functionally graded (FG) aluminum foams, whose pore structure varies with their position, have been developed. In this study, three types of FG aluminum foam of aluminum alloy die casting ADC12 with combinations of two different amounts of added blowing agent titanium(II) hydride (TiH₂) powder were fabricated by a friction stir weld...

7000 series aluminum alloys are widely used in the automotive industries for structural lightweight components due to their exceptional high strength to weight ratio. however, this class of aluminum alloy is difficult to join by conventional fusion welding techniques so friction stir welding (fsw) widely is used for welding this alloys. the process has been demonstrated to be effective and is c...