Nanoporous Pt-Co alloy nanowires were synthesized by electrodeposition of Co-rich Pt(1)Co(99) alloy into anodic aluminum oxide (AAO) membranes, followed by a dealloying treatment in a mild acidic medium. These nanowires consist of porous skeletons with tiny pores of 1-5 nm and crystalline ligaments of 2-8 nm. Morphological and compositional evolutions of the porous Pt-Co nanowires upon dealloyi...

Microsilica, or silica fume, is an amorphous type of silica mostly collected as byproduct of the silicon and ferrosilicon alloy production. In this work, low shrinkage alumina-mullite ceramic composites were prepared from mixtures of calcined alumina, silica fume and aluminum metal powder and sintered at 1550 o C for 2 hrs. The influence of silica fume and aluminum powder on the densification p...

Amorphous Co1-xPx alloy nanowire arrays with different sizes and 6.8 wt% x 9.9 wt% were fabricated in an anodic aluminum oxide film by electrodeposition. Transmission electron microscopy, selected area electron diffraction, X-ray fluorescence spectrometer, inductively coupled plasma-atomic emission spectrometer, X-ray diffraction spectrometer and vibrating sample magnetometer are employed to st...

The purpose of this study was to evaluate the effects of acidic primers on adhesive bonding to sintered aluminum oxide (alumina). Alumina disks were primed with one of the following materials: Acryl Bond, All Bond 2 Primer B, Alloy Primer, Estenia Opaque Primer, Eye Sight Opaque Primer, M.L. Primer, MR. Bond, and Super-Bond Liquid. Specimens were then bonded with an acrylic resin initiated with...

In the present study, mechanical properties and low cycle fatigue behavior of a solid-solutionized AA6061 aluminum alloy produced by equal channel angular pressing (ECAP) process were investigated. The grain refinement after two passes of ECAP significantly increased the yield stress and ultimate tensile stress and decreased the ductility of the alloy. However, the improvement of low cycle fati...

In the present work microstructural evolution of A356 Aluminum alloy using an inclined cooling plate casting process for thixoforming feedstock production is investigated. The resultant microstructure was evaluated and compared with those of the same alloy produced by the conventional casting process, i.e. directly cast in the same mold without using an inclined cooling plate. It was found that...

Triazinedithiol polymeric nanofilm was prepared on a pure aluminum surface by electrochemical polymerization of AF17N. The mechanism of the process was proposed and electrochemical polymerization parameters were investigated. The triazinedithiol polymeric nanofilm had notable lubricity, high dielectric property and superhydrophobic property due to the allyl and fluoro alkyl groups in the AF17N ...

This study is a follow-up of previous work by the authors on the effects of processing variables on the deformation and fracture of 2024-T4 aluminum. In the previous work, four variables were incorporated into a Design of Experiments methodology: solution temperature, solution time, cooling rate and natural aging time. Solution time and cooling rate were found to be the most significant factors...

Rene88 samples were investigated using atom probe tomography and x-ray diffraction using a monochromated synchrotron beam with different energy values to determine the preferred site occupancy of various alloying elements within the ordered γ’ precipitates. Samples were solutionized and cooled at 24 degree C/min with subsequent aging at 760 degrees C. The synchrotron-based x-ray diffraction res...

By undertakig an aging experiment on 2219 aluminum alloy under different external field and by the method of hardness test, a comparative study on the kinetics of aging generated under different external fields was conducted. Furthermore, the time-temperature-transformation curves (TTT curve) were obtained, and the microstructure and mechanical property of the alloy under the effect of differen...