BACKGROUND Zirconia was introduced as an alternative to alumina for use in the femoral head. The yttria stabilized zirconia material was improved by adding alumina. We evaluated highly cross-linked polyethylene wear performance of zirconia in total hip arthroplasty. The hypothesis was that alumina stabilized zirconia could decrease highly cross-linked polyethylene wear. METHODS Highly cross-l...

Alumina nanotubes (ANTs) with unique fusiform morphologies were synthesized via a simple electrochemical route; the fluctuation of the electronic current density during the anodization process is considered to be the main reason for the formation of such new alumina nanostructures.

A "sandwich" type polyoxometalate catalyst ([MeN(n-C8H17)3]12[WZn3(ZnW9O34)2]) was very efficiently recycled by nanofiltration with almost quantitative retention, using an alpha-alumina supported mesoporous gamma-alumina membrane.

the importance of the use of activated charcoal tubes for sampling gases and vapors is very well-known. for producing these tubes in the country, their production started in the laboratory of the department of occupation al health using activated charcoal, polyurethane foam and glass wool and consequently two types of foamed and foamless tubes were produced. to investigate the quality of the ra...

Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this research, the effect of mechanical stirring of slurry in liquid-solid phase temperature and injection of alumina powder with inert gas (Ar) on microstructure and mechanical properties of Al-A356 alloy is investigated. In order to improve of the wettability a...

Homogeneous distribution of mullite in the matrix of alumina can be obtained through sol-gel method. In this work, nanopowder of alumina-mullite composite was synthesized with high homogeneity and high purity. So aluminum chloride hexahydrate and tetraethyl orthosilicate were used instead of alumina or mullite nanopowder. Studying the simultaneouse thermal analysis (STA) of mullite precursor re...

In this paper, a new anisotropic material concept namely composite foam is proposed as an alternative to next generation helmet liners which can potentially reduce head rotational accelerations. The Layered Composite foam concept comprises of foam layers with different densities which are glued to each other in a parallel or series configuration. Initial experiments such as static combined shea...

Negative Poisson's ratio foam was used in the development of seat cushions which exert reduced peak pressure upon the skin of seated persons. Foam processing techniques were scaled up. A longer processing time was required for cushion size samples in comparison with small samples. Pressure distributions on a seated subject were measured using a pressure-sensitive array. Seated pressure distribu...